User Guide


LynxmotionUAV
QuadrinoNanoUserGuide


2.3 - Electrical Connections
AfewmandatoryconnectionsneedtobeperformedinordertogetafullyworkingQuadrinoNanoflightcontroller.
2.3.1 - GPS Antenna
TheprovidedGPSantennaneedstobeconnectedtothefrontSMAconnector.Besuretoproperlyinsertthethreadalltheway
downanddon’tapplytoomuchtorque.
2.3.2 - Receiver
EachRCradiocontrolmanufacturerimplementstheirownchannelassignmentfortheirreceivers,youmustthereforerefertoyour
transmitter’ssetupinordertoknowwhichchannelsareassignedtowhichfunctions.Thelabelinghereshouldhelpyoufindtheright
wiringsequence.TheQuadrino’sreceiverwiringharnessincludesindividualconnectionssoastobecompatiblewithanyRC
transmitter/receiver.

Theassignmentsaredefinedfromyourtransmitteritself,notMultiWii,andareoftenconfigurablethroughyourtransmitter’smenu(if
ithasanLCD).

ShownherearethedefaultsettingsfortheHitecbrand:
● CH1Ailerons/Roll
● CH2Elevator/Pitch
● CH3Throttle
● CH4Rudder/Yaw
● CH5…Otherchannels,ifavailable,aresetbythetransmitterforAuxiliary


QuadrinoNanoReceiverWiringHarness

LynxmotionUAV
P.5
