User Guide

Lynxmotion SSC-32U Servo Controller Board

Electronics Guide

USB

You can connect the board to a standard desktop or laptop computer using a normal USB cable

(miniB to A). Once the USB cable is connected, your computer should automatically detect it

and install the appropriate drivers to let the board appear as a COM port and allow programs on

your computer to communicate with the board. If your computer does not detect the board, you

should manually download and install the FTDI chip VCP drivers (based on your operating

system): http://www.ftdichip.com/Drivers/VCP.htm

SSC-32U Power

Note that not all USB cables are identical, and some only provide power rather than power and

communication. If you have issues communicating via USB with the board, first check power,

then change the USB cable.



 