Installation Guide

Place the sink in the hole at an angle, faucet side
rst. Make sure clips on the faucet deck are angled
as shown.
7a.
7a
Install faucet, any other accessories and drains per
manufacturers’ instructions. When installing drains
use a high grade silicone.
Warning: Do not use plumber’s putty. It will cause
product failure and void warranty. Use a high
grade silicone for all necessary locations.
6.
6
Page 4
Peel back protective lm around faucet, drain holes,
and sink perimeter.
5.
5
Remove the sink by pushing in on the side clips
from underneath and pushing up gently on sink
until free.
4.
4