Installation Instructions

Page 3
CLEANING
• Do not use any abrasive cleaners or metal scrapers.
• If drywall mud or plaster gets on your bathtub, it may be carefully removed with a wooden scraper made
from a piece of scrap wood.
• Adhesive may be removed with mineral spirits.
• Ideal cleaners are Soft Scrub Gel® or Comet Gel®.
• Hair dye may stain. Do not use.
• Do not use sulfuric acid to unclog drain, use plunger or snake to clear obstruction.
WARNING: Some cleaning products are not suitable for use. Read all labels carefully.
DO NOT USE if they say “not suitable for use with ABS, acrylic, or polystyrene."
Always rinse cleansers thoroughly within ve minutes of application.
LIGHT SCRATCH
1500 – 2000 grit
MEDIUM SCRATCH
1000 – 2000 grit
DEEP GOUGE
600 – 2000 grit
SUPERFICIAL SCRATCH
2000 grit
SCRATCH / SANDPAPER GUIDE
SCRATCH REMOVAL INSTRUCTIONS
1. For eective scratch removal and polishing, you will need to purchase these items.
1 sheet 1000 grit 3M® wet-dry sandpaper
1 sheet 1500 grit 3M® wet-dry sandpaper
1 sheet 2000 grit 3M® wet-dry sandpaper
1 small container of 3M® rubbing compound
These items can be purchased at most auto supply stores that provide supplies to professional
paint and body shops. Call before you go. Not all auto supply stores will have these items.
2. Start sanding with 2000 grit paper. Use small squares of paper about 2" x 2" for all sanding and
use lots of water. The water serves as both a lubricant and to prevent residue buildup on the
paper. Residue buildup shortens the eective life of the paper and may scratch the surface you’re
trying to polish.
3. 2000 grit paper is the nest grit available (the higher the number, the ner the grit). If you can’t
remove all of the scratches with 2000 grit, switch to 1500 grit. Remember to wash the paper
frequently with water as you sand.
4. If all of the scratches can’t be removed with 1500 grit, switch to 1000 grit. This should remove
most ne scratches. If you have deep scratches or a gouge, coarser paper may have to be used
(see chart to right). Be careful! Using grit that is too coarse may actually put in more scratches than
it removes.
5. Once you have removed all of the scratches, by sanding with the nest paper possible, repeat
the sanding process using successively ner grits of paper until you’ve once again sanded with
2000 grit.
6. Now use 3M® rubbing compound on a soft, damp cloth. Polish using considerable
pressure to produce a smooth, shiny nish.
Lyons Industries, Inc.
30000 M-62 West, Dowagiac, MI 49047
phone [phone] fax [phone]
lyonsindustries.com
e-mail [e-mail]
6-2019
DO NOT RETURN PRODUCT OR CONTACT STORE!
FOR QUESTIONS OR CONCERNS
please call or e-mail our customer support team
8:00am-4:30pm EST. Monday - Friday
1-800-458-9036
[e-mail]