Installation Instructions

ManualsBrandsLyons ManualsBathVictory™ 54" x 27" x 16" Almond Above Floor Center Drain Bathtub

Page 1

DO NOT RETURN PRODUCT!

FOR QUESTIONS OR CONCERNS

1-800-458-9036 lyonssupport@lyonsindustries.com

SUPPLIES YOU WILL NEED:

1-5/8" Stainless Steel Screws

Wood Shims (Optional)

Construction Adhesive

Mortar Compound (Optional)

Drain & Overow Assembly with Extension

100% Silicone for Drain

TOOLS YOU WILL NEED:

Level

Square

Jig Saw

Tape Measure

Pencil

Power Drill

Safety Glasses

STUD LAYOUT. Most standard bathtub walls

will t Lyons Victory™ bathtub

Subject to manufacturing tolerance of [+] or [-] 1/8"

Victory™ 603016 AFR Bathtub (VTLUxx603016)

17"

29⁄"

16"

59⁄"

= stud location

Left-hand drain shown—reverse layout for right-hand drain.

31½"

60"

11"

14⁄"

8½"

Drain C

Floor Cut Out

(6" x 10")

COMPLIANCE CERTIFICATIONS:

ANSI Z124.1 AND CAN/CSAB45

CAN/ULC S102.2 FLAME75

SMOKE DEVELOPED485 CODE

IMPORTANT

• Read installation instructions carefully before starting project

• Peel back protective lm to verify color before installation

• Allow bathtub to reach room temperature before installation

• Do not use plumber’s putty. Will cause product failure and void warranty.

Use a highgrade silicone caulk for all necessary locations

• Do not use sulfuric acid to unclog drain. Will cause product failure and void warranty.

Use plunger or snake to clear obstruction.

• Keep instructions for warranty information

Summary of content (4 pages)

PAGE 1
DO NOT RETURN PRODUCT! FOR QUESTIONS OR CONCERNS 1-800-458-9036 lyonssupport@lyonsindustries.com COMPLIANCE CERTIFICATIONS: TOOLS YOU WILL NEED: SUPPLIES YOU WILL NEED: ANSI Z124.1 AND CAN/CSA-B45 CAN/ULC S102.
PAGE 2
Victory™ 542716 AFR Bathtub without Overflow (VTLUxx542716) Left-hand drain shown—reverse layout for right-hand drain. 1" 17" 16" * 537⁄8" 267⁄8" 11" 123⁄8" 6" 28½" 8¾" Floor Cut Out (6" x 11") Drain CL = stud location 54" STUD LAYOUT. Most standard bathtub walls will fit Lyons Victory™ bathtub *If overflow is desired, use 2 3/8" hole saw. Drill on center, 2 3/8" down from deck of bathtub.
PAGE 3
INSTALLATION INSTRUCTIONS STEP 1. PREPARING ALCOVE a. Strip alcove to bare studs. b. Stud pocket should be constructed as shown above. Studs should be plumb and square to sub-floor (Fig 1). c. Floor must be clean, smooth, and level (check with level). Sub floor must be installed in the stud layout. Do not install bathtub on open floor joists. d. Cut hole in sub floor as shown above to accommodate drain (Not included). FIGURE 1. Check that studs are plumb with sub-floor/base. STEP 2. TRIAL FIT BATHTUB a.
PAGE 4
DO NOT RETURN PRODUCT OR CONTACT STORE! FOR QUESTIONS OR CONCERNS please call or e-mail our customer support team 8:00am-4:30pm EST. Monday - Friday 1-800-458-9036 lyonssupport@lyonsindustries.com LYONS BATHING FIXTURE — LIMITED WARRANTY 10-YEAR CONSUMER, 3-YEAR COMMERCIAL Lyons Industries, Inc.