SDS

D8280493 v1.0
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM
5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
sulfur oxides
metal oxide/oxides
Fire water contaminated with this material must be contained and prevented from being
discharged to any waterway, sewer or drain.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective
equipment for fire-fighters
:
:
:
Special protective actions
for fire-fighters
:
6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Move containers from spill area. Approach release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Avoid dust generation. Do not
dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place in a closed,
labeled waste container. Dispose of via a licensed waste disposal contractor. Note:
see Section 1 for emergency contact information and Section 13 for waste disposal.
:
:
No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Provide adequate ventilation.
Wear appropriate respirator when ventilation is inadequate. Put on appropriate
personal protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to
the environment if released in large quantities.
Large spill
:
Move containers from spill area. Avoid dust generation. Using a vacuum with HEPA
filter will reduce dust dispersal. Place spilled material in a designated, labeled waste
container. Dispose of via a licensed waste disposal contractor.
Small spill
:
Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders
:
If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".
7. Handling and storage
Protective measures
Put on appropriate personal protective equipment (see Section 8). Do not get in eyes or
on skin or clothing. Do not ingest. Avoid release to the environment. If during normal
use the material presents a respiratory hazard, use only with adequate ventilation or
wear appropriate respirator. Keep in the original container or an approved alternative
made from a compatible material, kept tightly closed when not in use. Empty containers
retain product residue and can be hazardous. Do not reuse container.
:
Precautions for safe handling
4/12
23/11/2016
Date of issue
:
SDS #
FF8261843
(D8280493) US
:
Code #
D8280493 v1.0
: