SDS

D0224478 v7.0
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM
6. Accidental release measures
Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Large spill
:
7. Handling and storage
Conditions for safe storage,
including any
incompatibilities
Do not store above the following temperature: 50°C (122°F). Store in accordance with
local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and drink. Eliminate all
ignition sources. Use appropriate containment to avoid environmental contamination.
:
Protective measures
Put on appropriate personal protective equipment (see Section 8). Pressurized container:
protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce
or burn, even after use. Do not ingest. Avoid contact with eyes, skin and clothing.
Avoid breathing gas. Avoid breathing vapor or mist. Use only with adequate ventilation.
Wear appropriate respirator when ventilation is inadequate. Store and use away from
heat, sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use only non-sparking tools.
Empty containers retain product residue and can be hazardous.
:
Precautions for safe handling
Ethyl alcohol
ACGIH TLV (United States, 6/2013).
STEL: 1000 ppm 15 minutes.
OSHA PEL 1989 (United States, 3/1989).
TWA: 1000 ppm 8 hours.
TWA: 1900 mg/m³ 8 hours.
NIOSH REL (United States, 10/2013).
TWA: 1000 ppm 10 hours.
TWA: 1900 mg/m³ 10 hours.
OSHA PEL (United States, 2/2013).
TWA: 1000 ppm 8 hours.
TWA: 1900 mg/m³ 8 hours.
butane
OSHA PEL 1989 (United States, 3/1989).
TWA: 800 ppm 8 hours.
TWA: 1900 mg/m³ 8 hours.
NIOSH REL (United States, 10/2013).
TWA: 800 ppm 10 hours.
TWA: 1900 mg/m³ 10 hours.
ACGIH TLV (United States, 6/2013).
STEL: 1000 ppm 15 minutes.
propane
OSHA PEL 1989 (United States, 3/1989).
8. Exposure controls/personal protection
Ingredient name
Exposure limits
Control
Occupational exposure limits
5/14
09/04/2015.
Date of issue
:
SDS #
D0224478_US GHS
:
Code #
D0224478 v7.0
: