Once you’ve selected a playlist, the song will begin to play and a simple control menu will appear on the display. SD Card Source: SD Card : plays the previous song on the playlist. / : pauses or plays the current song. 100% Album Title : plays the next song on the playlist. Song Title Artist Name 03:29 01:05 1 : return to previous screen. : when this option is selected, the current playlist will repeat upon completion. : when this option is selected, the current song will play repeatedly.
SYSTEM: Press this button to adjust Brightness, Sleep Mode, and Language settings. System Settings 100% Screen Brightness : decrease selected setting. : increase selected setting. : cycle through settings. Select System Turning on the Speaker 1. Connect the power cord to the power input (R) on the back of the speaker. Let it charge. 2. Flip the power switch (S) to the ON position. Note: This speaker can be used both while plugged into an outlet, or by relying on the internal rechargeable battery.
Linking an External Device It is possible to connect this speaker to another speaker in order to get fuller sound across a larger room. In order to connect to another speaker, follow the steps below. 1. If using and XLR-to-XLR cable, connect one end to the Mix Out (P) output on the first speaker and the XLR output on the second speaker. 2. If using an XLR-to-1/4" balanced cable, connect one end to the Mix Out (P) output on the first speaker, and the balanced/line input on the second. 3.
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.