Use and Care Manual

_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
_____________________________________________________________________________________________
Environmental precautions
Environmental precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage
if safe to do so. Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Do not touch or walk through spilled
material. A vapor suppressing foam may be used to reduce vapors. Dike far ahead of spill
to collect runoff water. Keep out of drains, sewers, ditches and waterways.
Methods for cleaning up
Take precautionary measures against static discharges. Dam up. Soak up with inert
absorbent material. Pick up and transfer to properly labeled containers.
Revision Date 29-Sep-2015
1283584 - M-1 Oil Based paint additive & Extender
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off
contaminated clothing and wash before reuse. Use personal protection equipment. Avoid
breathing vapors or mists. Keep away from heat/sparks/open flames/hot surfaces. - No
smoking. Use grounding and bonding connection when transferring this material to prevent
static discharge, fire or explosion. Use with local exhaust ventilation. Use spark-proof tools
and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to
package label instructions. Avoid contact with skin and eyes.
Conditions for safe storage, including any incompatibilities
Storage
Store locked up. Keep containers tightly closed in a dry, cool and well-ventilated place.
Protect from moisture. Keep out of the reach of children. Store away from other materials.
Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric
motors and static electricity). Keep in properly labeled containers. Do not store near
combustible materials. Keep in an area equipped with sprinklers. Store in accordance with
the particular national regulations. Store in accordance with local regulations.
Incompatible Products
None known based on information supplied.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Ensure adequate ventilation. Use personal protective equipment as required. Evacuate
personnel to safe areas. See section 8 for more information. Avoid contact with skin, eyes
or clothing. Keep people away from and upwind of spill/leak. ELIMINATE all ignition
sources (no smoking, flares, sparks or flames in immediate area). Pay attention to
flashback. Take precautionary measures against static discharges. All equipment used
when handling the product must be grounded. Do not touch or walk through spilled
material.
Other Information
Page 5 / 11
Refer to protective measures listed in Sections 7 and 8. Ventilate the area.