User guide

|
16
HyperControl for Pro Tools | Axiom Pro
2. “Ins” Page
If you have loaded an insert plug-in on your selected Pro Tools mixer track, pressing this button displays the
parameters of that plug-in and will allow you to control the plug-in using the Encoder knobs. In the example shown
above, the D-Verb plug-in is loaded into track “Vox Lead” of Pro Tools. If you would like to increase the Wet/Dry level
of the plug-in, turn Encoder Knob E3.
If the inserted plug-in features multiple pages of parameters that can be controlled by Axiom Pro, use Soft-Keys 3-4
(“< Page” and “Page >”) to step through all of the available parameters.
If the Pro Tools mixer has more than one insert on a track, press Soft-Key 2 (Ins) to step through all of the inserts
available on that track.
Pressing and holding Soft-Key 2 (Ins) will open and close the plug-in window.
Pressing Soft-Key 1 (Home) will return you to the HyperControl Home page.
3. “Sends” Page
The Send page allows you to use the Encoder knobs to set effect send levels for your Pro Tools mixer tracks. It is
possible to access up to five effect send slots for each mixer channel (“Send A” through “Send E”). You can step
through these slots by repeatedly pressing Soft-Key 3 (Sends). The current effect send slot is listed on the top-right
of the screen.
Note that the Encoder knobs control the same Send slot across the selected bank of Pro Tools channels. For
example, if “Send A” is selected for tracks 1 – 8, turning Encoder Knob E1 will affect the first channel’s Send A
level, Encoder Knob E2 will affect the second channel’s Send A slot, and so on. If you would like to simultaneously
control two or more send levels on a single channel of Pro Tools, press Soft-Key 4 (Chan) to access the “Channel”
HyperControl page. The Channel page is described below.
✓ NOTE: You must first assign and activate a send on your Pro Tools mixer channel before you can use the
Sends page. If no send has been assigned, turning an Encoder Knob will not have any effect within Pro Tools
(or the Axiom Pro display).
Pressing Soft-Key 1 (Home) or Soft-Key 2 (Ins) will take you to the Home and Insert HyperControl pages,
respectively.