User guide

|
17
HyperControl for Pro Tools | Axiom Pro
4. “Chan” Page
Whereas the “Home” and “Sends” HyperControl pages provide a global overview of one parameter across a bank of
eight Pro Tools tracks, this page provides a detailed view of all parameters on one specific Pro Tools channel.
This page lets you use the Encoder knobs to simultaneously control both Left and Right pan faders (if a stereo
channel is used) as well as all of the effect send levels of one channel without having to step through multiple
sub-menus (Send A through Send E, for example). In the example shown above, Send A and Send B have been
assigned to Bus 1-2 and 3-4, respectively. If sends have been assigned to other busses (or to the outputs of your
audio interface), these busses or outputs will be listed on the Axiom Pro display. If a send has not been assigned,
“no send” will be displayed on Axiom Pro.
✓ NOTE: Since the Chan page has up to seven editable parameters, Encoder Knob E8 is never used on
this page.