User guide

23
Appendix (English)
Technical Specifications
Type
2-way near-field studio reference monitors
LF Driver
5-inch (127 mm) Kevlar curved cone with high temperature voice
coil and damped rubber surround. Magnetically shielded
HF Driver
1-inch (25 mm) magnetically shielded natural silk dome
Frequency Response
45 Hz – 22 kHz
Crossover Frequency
3 kHz
LF Amplifier Power
60 W
HF Amplifier Power
40 W
Signal-to-Noise Ratio
100 dB typical A-weighted
Input Connectors
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Polarity
Positive signal at + input produce outward LF cone displacement
Input Impedance
20 KΩ balanced, 10 KΩ unbalanced
Input Sensitivity
85 mV pink noise input produces 90 dBA output SPL at 1 meter
with volume control at maximum
Protection
RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external mains fuse.
Indicator
Power on/off indicator on rear panel
Power Requirements
Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or
100 V ~50/60 Hz
Cabinet
Vinyl-laminated high-acoustic-efficiency MDF
Dimension
(height x width x depth)
9.8" x 6.9" x 7.9"
250 mm x 176 mm x 200 mm
Weight
(without packing)
11 lbs.
5.0 kg
* Specifications are subject to change without notice.
Trademarks and Licenses
All other product or company names are trademarks or registered trademarks of their
respective owners.