Manual

NOTE: When any signal is present at the CT-14 input, the
“Signal Present” LED will light on the front of the unit. The
CT-14 is “format neutral” and does not analyze the incoming
signal. Therefore, although signal presence is detected by
the CT-14, it may not necessarily be a valid S/PDIF format
signal.
Other Typical uses of the CT-14
• Sending a single digital out to multiple digital effects units.
• Outputting to several D/A converters simultaneously.
• Using a single digital out to both monitor your system’s
output and master to DAT and/or CD at the same time.
• Multiplying the sends on your digital mixer
If you have any questions about your CT-14, please
contact our tech support in any of the following ways:
voice: [phone]
email: [e-mail]
fax: [phone]
USA: 45 E. St. Joseph Street • Arcadia, CA 91006-2861 • Tel: [phone]
Fax: [phone] • Web: http://www.midiman.net • Email: [e-mail]
UK: Unit 22, Harrogate Business Park • Freemans Way • Harrogate • N Yorks • HG3 1DH • England
Tel: [phone] • Fax: [phone]• Email: [e-mail]
Germany: Kuhallmand 34 • D-74613 Ohringen • Germany • Tel: [phone]
Fax: [phone] • Web: http://www.midiman.de • Email: [e-mail]
1
AUDIO
TM