Owner's manual

7. Screw the Delta R-BUS PCI host card’s metal bracket down into the

bracket hole on the back of your computer using the screw you

removed in step 5 above.

8. Place the cover back on your computer.

Now it is time to connect the Delta R-BUS’s breakout cable to the PCI host

card that you have just installed. Never attach the break-out cable with

the computer turned on. Doing so could damage the PCI card, and void

your warranty. Similarly, you should power down your computer before

attaching your R-BUS device to the 25-pin connector. With your

computer turned off:

1. Unwrap the Delta R-BUS breakout cable. Locate the 15-pin D-sub

connector on the Delta R-BUS PCI Host card.

2. Connect D-sub end of the breakout cable to the 15-pin D-sub connector

on the Delta R-BUS PCI Host card that now resides in your computer.

Delta Driver Software Installation

The Delta R-BUS system includes a driver CD for Windows

95/98/NT/ME/ 2000 and Macintosh, containing all Windows drivers,

Macintosh drivers, and Delta Control Panel software. To install these on

your system, please follow these steps:

Windows 2000 Installation

1. After installing the Delta R-BUS hardware, boot your system and start

Windows. During the Windows boot procedure, new hardware will

be automatically detected by the Found New Hardware Wizard.

Click ‘Next>’.

2. The ‘Found New Hardware Wizard’ will now ask how you want to

find the driver. "Search for the best driver for your device" is already

selected. Click ‘Next>’.

3. Windows will give you a selection of locations to search. Make sure

that only “Choose a Path” is checked, or click on the check box to do

so. Insert the Driver CD into your CD ROM drive. Type in the drive

letter of your CD drive (we will assume here that it is D:\) and the

path to the Delta drivers, which will be D:\Delta Series\Wdm. Click

‘Next>’.

4. The ‘Wizard’ reports that its Windows driver file search has found the

M Audio Delta R-BUS. Click Next>.

5. Windows is now ready to install the driver files from the specified

location. Click Next>. Windows will start to copy the files and show

you a progress report screen.