Owner manual

In all cases, DigiPatch units should be MIDI wired in a series. That

is, take the ‘MIDI out’ of you computer interface and plug it into the

‘MIDI in’ of the first DigiPatch unit. Take the ‘ MIDI out’ of your

first DigiPatch unit and connect it to the ‘ MIDI in’ of the second, and

so on. Finally, if you want to run the app in Two Way Mode, you

must connect the ‘ MIDI out’ of the final DigiPatch unit to the ‘ MIDI

in’ of your computer interface.

IMPORTANT: When you first fire up this program you may “get

silly” and create way too many Patchbay Windows (if you are in sin-

gle ended mode). There is no obvious way to destroy these buggers

— selecting ‘Close’ from the File menu only hides the window until

you select ‘Show All’ from the Windows menu.

TO PERMANENTLY ERASE A PATCHBAY WINDOW FROM THE

PREFERENCES FILE:

1) Hold down the OPTION key as you select ‘Close’ from the

File menu, or...

2) Press OPTION ‘W’.

You will be presented with a dialog asking you to confirm your

selection.