User`s guide

136 Peak User’s Guide
• You may need to turn on your SCSI devices in the
correct order. Turn all of the SCSI devices
connected to your Macintosh on first, then turn on
the Macintosh and launch the Peak application.
A note about the Yamaha A3000
Peak supports the Yamaha A3000 digital sampler. You
can access the A3000 sampler using either the Yamaha
A3000 or SMDI menu selection under Peak’s Sampler
menu. Please note the A3000 cannot replace existing
samples, and any transfers to the A3000 will be placed
in at the next available empty sample in RAM,
regardless of where you instruct Peak to place the
sample. When “BulkProtect” is turned on, the A3000
does not respond to SMDI messages. “BulkProtect” is
at UTILITY mode, MIDI function, Bulk page.
BulkProtect is always ON after you turn on the A3000,
so you will need to turn it off before you can do SMDI
transfers.
The Sampler Preferences dialog
You can access the Sampler Preferences from under
Peak’s Preference menu to set Loop Offsets, Asynchro-
nous SCSI transfer, and SCSI Management prefer-
ences.
The Sampler Preferences dialog
Working with the Roland S-760
Sampler
The Roland S-760 sampler dialog
The Roland S-760 digital sampler is fully supported in
Peak. Direct support for Roland in Peak makes it easy