User guide

Chapter 4: Edit Mode
18
Keystation Mini 32 User Guide
To return the Pitch Bend buttons to the default parameter:
1 Press the Edit button. The Edit button light will illuminate to full brightness.
2 Press the “PB ASSIGN” key (D#, 2nd black key from the right).
3 Press the “DEFAULT” key (C, 8th white key from the left). The Edit light will dim to half brightness indi-
cating that programming is complete.
Pitch Bend Rate
It is possible to alter the sensitivity of the Pitch Bend buttons using the Pitch Bend Rate function. This lets you
adjust the pitch bend ramp up time. The default setting is 80, with a range of 0 - 127. As the shown in the fol-
lowing table, the lower the value, the slower the Pitch Bend Rate and vice versa.
The Pitch Bend Rate can be adjusted using the “PB RATE” key in conjunction with the numerical keys. The fol-
lowing instructions use the example of changing the Pitch Bend Rate to 127.
To adjust the Pitch Bend Rate:
1 Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.
2 Press the “PB RATE” key (E, 3rd white key from the left).
3 Press E (10th white key from the right) to enter “1.”
4 Press F (9th white key from the right) to enter “2.”
5 Press D (4th white key from the right) to enter “7.”
Value Rate
0 Ramp occurs slowly
80 [default] Ramp occurs relatively quickly
126 Ramp occurs very quickly
127 No ramp. Only one value is sent – min. or max
CANCEL
Panic
PB Rate
Velocity
Sustain Mode
Default
0 1 2 3 4 5 6 7 8 9
ENTER
Data = Octacve Data = Transpose Data = Program Data = Bank LSB Data = Bank MSB Data = Channel Data = Tuning Program Bank LSB Bank MSB Mod Assign PB Assign Knob Assign
Mod Rate