G U A R A N T E E D F O R L I F E 1 MANUAL Merge 2x2 ™ 2 IN 2 OUT M I D I MERGER
Merge 2x2 ™ 2 IN/2 OUT MIDI MERGER The Merge 2 x 2 MIDI Merger allows any two incoming MIDI signals to be merged and sent to either one or two MIDI devices. Merge 2 x 2 can also be used as a 1 In / 2 Out MIDI thru box. Merge 2 x 2 can be used whenever you have two MIDI signals that need to go to the same destination. Also, if you find that your MIDI system has had a “nervous breakdown,” the 2 x 2 has a built-in “panic button” feature.
Merge 2x2 Hook-Up Diagram To Various Instruments’ MIDI Ins MIDI OUT Merge 2x2 TM 2 IN/2 OUT MIDI MERGE BOX TM 9VDC MIDI IN + Optional Power POWER From MIDI Outs LED Indicator ment MIDI In. The Merge 2 x 2 has a built-in “Panic Button” which will send “all notes off” messages and zero all MIDI controllers and pitch wheels. This feature is activated by powering down the Merge 2 x 2 and then powering it back up again.
before turning the power back on. that the 2x2 resets properly. This will ensure Merge 2 x 2 is designed to consume almost no power. However, very rarely you may encounter some older MIDI device that requires more power than 2 x 2 can deliver. This can only happen if the instrument draws more power than allowed in the MIDI specification. If you encounter this situation, there is a standard 9-volt, center pin positive, power jack on the side of Merge 2 x 2.
