User guide

8
Important Note
In order for Trigger Finger Pro to affect Arsenal's Assignable Controls and Pads, Trigger Finger
Pro's Assignable Knobs, Assignable Faders, Assignable Buttons, and pads must their
Mapping set to Arsenal. This is done automatically when you select a preset on Trigger Finger
Pro whose name includes Arsenal. If, however, you change the mapping or create a new
preset that you want to control Arsenal, remember to do the following:
To set Trigger Finger Pro to control Arsenal:
1. Press Trigger Finger Pro's Control Mode (Ctrl) button.
2. Press the third Function Button (Mapping).
3. Use the Value Dial to select the control type (Knobs, Faders, or Buttons).
4. Press the second Function Button (Toggle All) until all banks on the left of the display
list Arsenal. Alternatively, use the Assignable Knobs to select the mapping, if you want
to allow only certain banks to control Arsenal.
5. Repeat Steps 3-4 for the other controls on Trigger Finger Pro (Knobs, Faders, or
Buttons).
6. Press the fourth Function Button (Exit).
7. Press Trigger Finger Pro's Pad Mode (Pad) button.
8. Press the third Function Button (Mapping).
9. Press the second Function Button (Toggle All) until all banks on the left of the display
list Arsenal. Alternatively, use the Assignable Knobs to select the mapping, if you want
to allow only certain banks to control Arsenal.
10. Press the fourth Function Button (Exit).