Duo USB Audio User's Manuual

driver. Note: If the "USB Composite Device" has already been installed then

Windows will skip this step. This will occur if a USB audio device had

previously been installed in your system.

3. Windows will report that “USB Duo New Hardware” was found. When the

Add New Hardware Wizard reports that it wants to search for a driver for a

USB Composite Device, click "Next".

4. On the next screen select the "Search for the best driver for your device." item,

and then click "Next".

5. On the next screen, remove the check marks from all of the optional search

locations except "Specify a location." Insert the included Driver CD, click

“Browse,” then, on your computer’s CD drive, locate the folder

“USB_AUDIO\DUO\WIN98SE.” Click "Next".

6. On the next screen, Windows will indicate it has found an updated driver for

this device. Keep the updated driver selected and click "Next".

7. Windows will report that is it ready to install the driver. Click "Next" to

continue.

8. Windows will process the files and then indicate it has finished installing the

software that your new hardware device requires. Click the "Finish" button.

You will need to repeat this step as many times as Windows finds a new

hardware device. By the time everything is finished you will have installed

the Duo’s Windows MME drivers, plus the ASIO and EASI drivers.

9. Windows might indicate it cannot find a file it is attempting to copy from the

Windows 98 CD. If so, insert your Windows 98 Second Edition CD, then use

the Browse button to point to this CD and continue.

10. Windows will process the files and then indicate it has finished installing the

software that your new hardware device requires. Click the "Finish" button.

Note: At this point you might need to wait for several minutes while

Windows configures the hardware. Please be patient.

11. Restart the computer after the installation is finished.

Hardware & Software Installation on the Mac

Here is a simple, step-by-step procedure for attaching and powering up the Duo

on the Macintosh Computer. The Duo comes with an installer program that will

place all driver components in their proper folders.

The installer program will give you a list of ASIO compliant programs that it

will recognize and subsequently install the appropriate ASIO driver if the

program exists on your system (that being said, it is a good idea to first install

your music program before installing the Duo drivers, though Duo drivers can be

installed again if necessary). Otherwise, the Duo ASIO drivers (and the

remaining ASIO drivers that have not been used) will be placed in a folder on

your desktop called “Duo ASIO,” and must be inserted into your music

program’s ASIO folder manually, provided that your music program uses ASIO.

1. On the Driver Disk that came with your Duo, locate the folder

“USB_Audio_Duo” that contains the USB Duo Installer for the Macintosh.