USER GUIDE USB

ManualsBrandsM-Audio ManualsNetwork CardUSB

Contents
Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
What’s in the Box?   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Transit USB Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Transit USB Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Software Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Windows XP   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Windows 2000   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Windows ME   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Windows 98SE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
MacOS 9.2.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Mac OSX   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Transit USB Audio Connnections   . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Output Connections   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Input Connections   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Transit USB’s Control Panel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Operating Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Latency   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Transit USB and the Windows Media Drivers . . . . . . . . . . . . . . . . . .24
WDM/MME   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ASIO   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Transit USB and Macintosh Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Mac OS 9.2.2   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Mac OS X   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Warranty Information   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
E
N
G
L
I
S
H

Summary of content (15 pages)

PAGE 1
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Transit USB Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Transit USB Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
E N G L I S H Introduction Technical Features: Thanks for choosing the Transit USB by M-Audio.Transit USB is your compact, professional audio solution for any Windows or Macintosh computer*, using the convenience of USB connectivity – no need to disassemble your computer, no bulky external power supplies.
PAGE 3
E N G L I S H System Requirements, Macintosh: Minimum: • G3, G4, iMac, iBook or Powerbook with native USB support • 64 MB RAM • CD-ROM drive • Mac OS version 9.2.2, MacOSX version 10.1.5 or later, or MacOSX “Jaguar” version 10.2.4 or later Recommended: • • • • G3, G4, iMac, iBook or Powerbook with native USB support 128 MB RAM DVD-ROM drive MacOSX “Jaguar” version 10.2.4 or later 3. 4. 5.
PAGE 4
E N G L I S H default settings for CD and DVD playback selected. Unless you’re certain your hardware is incompatible with these settings, it is recommended that you leave them selected . to install Transit USB. Click Next to continue. 3. 4. 5. The installer will copy the Transit USB files to your computer’s hard drive. The Software Installation window may appear one or more times, warning you that the driver software has not passed the Windows Logo testing. Click the “Continue Anyway” button.
PAGE 5
E N G L I S H again see the warning that the driver software has not passed the Windows Logo testing; click “Continue Anyway” and allow the installation to complete. Click Finish. 3. The installer will begin to copy the Transit USB files to your computer’s hard drive. 4. The Digital Signature window will appear, warning you that the driver software does not contain a Microsoft digital signature. Click the Yes button to continue the installation. 10.
PAGE 6
E N G L I S H 5. Once the driver files have successfully been installed, the CD Performance Enhancements screen will appear. By default, the performance enhancement settings for CD and DVD playback will be selected. It is recommended you leave them selected unless you are certain that your hardware is incompatible with these settings. 9. 6. The New Hardware Wizard will write the remaining files to your system. When the installation is complete, click Finish.
PAGE 7
E N G L I S H 1. 2. 3. 4. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you wish to install Transit USB. Click Next to continue. 5. After the driver files have been installed, you will be prompted to restart your computer.
PAGE 8
E N G L I S H wish to install Transit USB. Click Next to continue. file ksuser.dll. Click Yes to continue. 9. If you are running an older version of Windows ME, you may be required to replace the file stream.sys. Click Yes to continue. 10. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function.
PAGE 9
E N G L I S H 5. After the driver files have been installed, you will be prompted to restart your computer. Click Finish and your computer will reboot. 6. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port. Windows will display the Found New Hardware dialog and will open the Windows Hardware Wizard. Choose the default “Search for the best driver for your device” and click Next. 8.
PAGE 10
E N G L I S H 12. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function. 5. For first-time installations,the default Easy Install is the desired selection..Click Install to continue. 6. You will be prompted to restart your computer. Click Continue. 7. 8.
PAGE 11
E N G L I S H Changes." In OSX version10.2.2 this authentication dialog will automatically appear. 8 9. If prompted to do so, click "Upgrade" to continue. When prompted, click "Continue Installation." 5. 6. Enter your password and click "OK." The next window "Welcomes You..." to the installation process. Click "Continue." 10. When prompted, click "Restart" to finish the installation. 7. Select your OS X hard drive. Click "Continue." 11.
PAGE 12
E N G L I S H output can be connected to powered speakers, headphones or to the analog inputs of your home stereo system, using a 1/8”-to-RCA adapter. The Transit USB also has an optical digital output, sometimes referred to as a TOSLink or Lightpipe connector. You may connect this digital output to the optical digital inputs of a home theater or stereo, CD-R or MiniDisc recorder, or any device that supports a twochannel optical digital input.
PAGE 13
E N G L I S H Transit USB and the Windows Media Drivers WDM/MME Transit USB’s Windows drivers support Windows’ native WDM/MME protocol, allowing you to use Transit USB as your Windows default audio device. If Transit USB is the only audio device installed on your computer, Windows will select it automatically. If you have other audio devices installed, you may need to select it as your default device: 1. 2. 3. Click the Start menu, then choose Settings/Control Panel Open the audio properties panel.
PAGE 14
E N G L I S H Contact Information Warranty Information For additional help, contact Midiman/M-Audio Technical Support by telephone (626-4458495, 9-5 PST M-F), by fax (626-445-7564) or by e-mail (techsupt@m-audio.com).
PAGE 15
30