Operator's manual

Gas sampling and gas conditioning technology 6-1.3.5-ME

9 DIMENSIONS

The dimensions of the MP30 are shown below:

Figure 2 Dimensions (mm) MP30

10 RECEIPT AND STORAGE

 Carefully remove the diaphragm pump and any accessories from the transport packaging

immediately upon receipt and check the delivery against the delivery note.

 Check the contents for possible transport damage and immediately notify the transport insurer of

any damage.

NOTE!

The diaphragm pump should be stored in a protected, frost-free room.

11 INSTALLATION INFORMATION

The safety rules and regulations for the prevention of accidents must be observed during installation

and also subsequent operation. The information in Chapter 3‚ “Safety” must be observed.