Operator's manual

Gas sampling and gas conditioning technology 6-1.3.5-ME

NOTE!

If none of the specified faults can be located, despite the pump not

operating correctly, the pump should be returned to M&C for examination.

When sending diaphragm pumps for repair to M&C Customer Service,

information about the transported medium is required.

Our workshop should be informed in particular about aggressive media.

Where pumps have been used for transporting dangerous or highly

aggressive gases, these should be cleaned prior to being returned.

17 SPARE PARTS

Wear, tear and replacement part requirements depend on specific operating conditions.

The recommended quantities are based on experience and are not binding.

Diaphragm Pump

Type MP30

Recommended quantity

MP30 being in operation

(f.d. = for demand)

V/E/T 1 2 3

90P1500

Diaphragm 8

C 1 2 3

90P1510

Set sealing ring 3 (2 pc., Kalrez

)

C 1 2 3

90P1505

Set valve plate 2 (2 pc.)

C 2 4 6

PVDF male connectors with G-thread (ISO 1010031)

05V1045 Straight connector

DN 4/6-G1/8” material: PVDF

S - - 2

05V1050 Straight connector

DN 6/8-G1/8” material: PVDF

S - - 2

05V6600 Ferrule DN 4/6 PVDF S 2 2 4

05V6602 Ferrule DN 6/8 PVDF S 2 2 4

05V6605 Union nut DN 4/6 PVDF S 2 2 4

05V6607 Union nut DN 6/8 PVDF S 2 2 4

18 APPENDIX

More product documentation is available on our Internet catalogue: