Operator's manual Owner's manual

14
Gas sampling and gas conditioning technology 10-5.1-ME
16.3 SWITCHING ON
The heating is switched on by pressing the push/turn control.
Heating switched off. The push/turn control is Heating switched on and can be operated
using the pushed in and protected against damage push/turn control and the SET key.
16.4 SETTING AIR CHANGES
Moving the air slider opens and closes the air valve to control the supply and discharge of air.
Air valve closed Air valve open
16.5 SETTING THE TEMPERATURE
Hold down the SET key and set the temperature set point with the push/turn control. After the SET key
has been released the display briefly flashes the temperature set point. The display then changes to
the actual current temperature and the controller starts to control to the selected temperature
set point.
16.6 SELECTING THE OPERATING MODE
Normal Timer
Operation Operation
After holding down the SET key (approx. 3 sec), the current operating mode flashes on the display. A
different operating mode can be selected with the push/turn control while the SET key is being held
down. After the SET key has been released the controller operates in the new operating mode.