Operator's manual Owner's manual

7
Gas sampling and gas conditioning technology 10-5.1-ME
6 INTRODUCTION
A big problem of the extractive continuous gas analysis are the escort substances of the gas, such as
water vapour as well as gas components that produce corrosive acids in connection with condensed
water vapour.
In order to realise a maintenance-free resp. “hot” measurement, the condensation of water vapour and
gas components within the gas conditioning must be prevented.
The solution for this problem are the heated M&C sample conditioning units PAS. If these systems are
correctly adapted to the local process conditions, they guarantee a minimum maintenance
requirement.
7 SERIAL NUMBER
The type plates with the serial numbers are to be found down on the right side behind the door.
NOTE!
In case of any question, please always indicate the serial number of the
device.
8 VOLTAGE SUPPLY
The heated protective housings PAS are available in 115V or 230V execution. Detailed information
are to be read on the type plate.
9 WARNINGS AND NOTES
NOTE!
The notes and warnings given in this Operating Manual must absolutely be
heeded!