Operation Manual

INSTRUCTION FOR INSTALLATION AND USE - LUNA 700-1000-1150-1300-1600-1900H GOLD - GAS
28
11. STARTPILOT
The M-Design Gas appliance are provided with “Constant startpilot”. After the rst use or when
the winterperiod is coming and
you use the replace daily, you must let the startpilot switch ON. Don’t switch it o after each use.
This startpilot avoids condensation in the replace and protects the whole appliance and even the
electronic parts against humidity.
This startpilot has a very low gasconsumption.
12. USING THE MANUAL CONTROL ( BLACK BOX )
On the user interface, a potentiometer is connected. This one will be used only when
the remote control is broken.
DON’T USE THE POTENTIOMETER SIMULTANIOUSLY WITH THE REMOTE CONTROL
TO SET THE REQUIRED LOAD.
When no ignition with remote control, set potentiometer knob “o” ( turn left ).
Push once on the black push buon. You will hear the starpilot ignition.
Once you see the ame on the starpilot , just turn the potentiometer to the right to regulate
the ames.
To switch o , turn the potentiometer to the left “o” and push once to extinguish the starpilot
ame. Push a second time to swith o the whole replace.
push buon
LED
potentiometer
knob