Operation Manual

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

Fig.12

ATTENTION : FOT THE LUNA 550V YOU DON’T FIND A PLATE nr 1a AND nr 3. THIS IS BE-

CAUSE OF THE NARROW ARCHITECTURE OF THIS MODEL. IN ANY CIRCUMSTANCES

THIS WILL NOT GIVE A BAD FUCNTION OF THE APPLIANCE.

Fig.12

Pic..13

Pic.15

IMPORTANT :

THIS MUST BE DONE IF YOU DIDN’T FOUND

SATISFACTION WITH 2.9.1.1 AND 2.9.1.2

2.9.3. SECUNDARY AIR FLOW FOR COMBUSTION

At the top of the window, across the whole witdh, a secondary

air ow for combustion is provided. The gap between the main

frame of the appliance and the window is regulated automatically

with two bimetallic strips. At each of the superior corners of the

window, you’ll nd two circular magnets. Those ensures that the

window is closing well against the bimetals situated on the main

frame of the applliance.

When the aplliance is still in cold situation, the gap between the

window and the main frame is made in that way the re gets

enough oxygen. When the appliance gets warmer, bimetals comes

in action and pulls the window in their direction to reduce the gap

and in this way reduces automatically the intesity of the re.

If you are feeling the combustion is a less controlable, it is

possible to remove a ring (pic.15 ) , even two if necessary.

Remove rst the magnet and you will nd the rings behind it.