Operation Manual

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD
1.3 STARTING THE FIRE
• Open the window (pic.3).
• Put a bed of tinder (paper or relighters) with a lile kindling (small twigs or pieces of wood) in
the stove and light the tinder.
• Leave the door slightly ajar (+ 3 cm) to get a turbo stream of air that will make the kindling catch
re.
•After the kindling has caught re and burns well, the logs may be placed on the re. After the logs
have caught re, the window may be shut.
NOTE: When a re is made for the rst time, the paint will harden and that give o smoke
and a smell, which starts after the re has burned for about 10 minutes and lasts for about
15 minutes. See to it that there is ample ventilation in the room.
CAUTION :
It is not necessary to overload the replace with wood.
1 kg dry wood gives a 4 kW power.
Example : a replace with a 78% return gives a power for about 4kw x 78% = +/- 3 kW for 1 kg dry
wood.
If you want a power of +/-12 kW , it is just enough to put 4 kg wood in the replace. This is like
two normal pieces of wood.
Be carefull not to use palletwood (this gives an enormous heat) for continuous heating. This can
lead to re hazard. We are not responsible for the bad use of the replaces and any consequence
for not following this guideline.
pic. 3
5