Operation Manual
INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD
The grids are provided with two connections. 2 exibles for one grid !
Two holes between the two connection provides ventillation in the
maconry.
To simplify the mounting of the grids you can use the corner prole wich
is furnished with the grid. This prole is can be mounted on the side of
the grid (two lile wholes en screws are provided).
Note: a circulation of hot air requires that no under-pressure be created
in the room. A grid that is near the oor (pic 7d) sees to it that cold air
can be drawn in. Don’t connect those with a exible. Air will nd the
way to get at the right place. Place all the ings that you use at the
same lengths and angles if possible, otherwise it is possible that some
grids give o more heat than others and, seeing that a hot air pipe func
-
tions in a manner similar to a chimney, the one that is hot rst has the
most draught and therefore becomes hot even more quickly.
2.7 FAN
2.7.1 Installation
• Remove the Chamotex plates, the boom plates and the opening to
the fan. See pic.8.
• Now slide the fan downwards to just under the stove.
• Make the necessary electrical connections.
2.7.2 Fan dimmer
•Leave the adjustment of the fan speed closed.
• Fuse 1.5A (Take the knob o, unscrew the lile plate, take it
out if it is to be replaced.)
• The adjustment screw for the minimum speed is under the knob.
(M-design has developed a new induction dimmer which lets the fan run
noiselessly and which may be bought as an option.)
• The fan (optional) may be started after the re has burned for 15 minu-
tes.
• Let the fan turn at the maximum speed for 12 hours the rst time to let
it run in.
FIG.
Pic. 7d
corner
prole
Pic. 8
Pic. 7c
12