MK104 User Manual BLE Keyless System-Control Box Rev06 2022/10/7 Whayu industrial co. ltd TEL: 03-5714225 No.326, Sec. 2, Kung Tao 5 Road., Hsinchu City 30070, Taiwan (R.O.C.
MK104 User Manual Table of Contents 1. Electrical Characteristics ................................................................................................... 3 2. Pin Definition ..................................................................................................................... 3 3. 產品部件說明 Product Parts Description ....................................................................... 4 4. 5. 6. 產品安裝 Product Installation ..........................................................
MK104 User Manual Revision History Date Release Author Description 2022/7/1 R01 Lance/Justin R01 2022/7/7 R02 Lance/Justin Add PCBA Dimension 2022/9/19 R03 Lance/Justin Add NCC Notice Information 2022/9/22 R04 Lance/Justin Correct Antenna model name 2022/10/7 R05 Lance/Justin Add device use instructions 2022/10/7 R06 Lance/Justin Remove BD Related Documents Date Whayu Industrial Co., Ltd. Author Document(s) http://www.whayu.
MK104 User Manual 1. Electrical Characteristics Item Spec Rated Voltage DC 12V Operation Voltage Range Operation Temperature Storage Temperature Standby Current Maximum Bonding Devices (Keyfobs) BLE transmit power BLE receive sensitivty level LF frequency LF modulation scheme Solenoid Drive Signal Buzzer Drive Signal LED Drive Signal Turn Light Drive Signal DC 8~16V -20℃ ~ +80℃ -40℃ ~ +85℃ <2mA 4 6 dBm (typ.
MK104 User Manual B1 B2 B3 Turn Signal 2 Buzzer - negative Buzzer - positive OUT GND OUT (Reserved) B4 B5 B6 B7 B8 C1 C2 C3 C4 C5 C6 C7 C8 125 KHz Antenna Data2 125 KHz Antenna Data1 Solenoid - negative Solenoid - positive GND NC NC NC NC Output signal 2(P) Output signal 1(O) NC NC OUT OUT GND OUT GND 12V, Duty Cycle 50%,20KHz GROUND OUT OUT (Reserved) (Reserved) DC 12V 3. 產品部件說明 Product Parts Description Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual A. 主開關固定鎖附點 Attachment Point :將產品去車體固定之鎖點。 : Locking point to fix the product to the body of the vehicle. B. 控制面板連接器 Control Panel Connector :將主開關面蓋與控制器連接之連接器。 :Connector to connect the control panel and control box C. 控制盒連接器 Control Box Connector :與控制盒連接之連接器。 :Connector to connect control box D. 車輛連接器 Vehicle Connector :將產品與車體連接之連接器。 :Connector to connect the product to the vehicle body E.
MK104 User Manual :控制器之接地線。 :Ground wire of controller G. 龍頭鎖桿 Steering Lock Bar :固定車輛方向機之鎖桿。 :bar for locking vehicle steering handle H. 控制面板 Control Panel :使用者操作之操作面板。 :Control Panel for user-operated I. 控制盒 Control Box :控制電路板總成。 :BLE Keyless system control box assembly. J. 智慧鑰匙 Smart Keyfob :可進行免鑰匙操作之智慧鑰匙。 :Smart keyfob for keyless operation. Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual 4. 產品安裝 Product Installation 1. 將原始主開關卸下。 Remove the original main switch. 2. 固定 Keyless 主開關：將 Keyless 主開關固定於車架。 Fix Keyless main switch: Fix the keyless main switch to the frame. 3. 安裝油箱蓋與坐墊鎖之鋼纜：如原廠安裝方式，安裝回油箱蓋與坐墊鎖之鋼纜。 Install the cables for the fuel tank cover and seat cushion lock: Install the cables for the fuel tank cover and seat cushion lock in the same way as the original installation. Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual 4. 安裝控制面板：由另一頭安裝控制面板，並且鎖緊於 Keyless 主開關上。 Install the control panel: Install the control panel from the other side and lock it to the Keyless main switch. 5. 連接控制面板連接器：固定好控制面板後，將控制面板連接器與對手件相接。 Connect the control panel connector: After fixing the control panel, connect the control panel connector to the mating connector. Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual 6. 連接控制盒：將控制盒與 Keyless 主開關連接。 Connect the control box: Connect the control box to the Keyless main switch. 7. 將 Keyless 主開關與車輛連接：將 Keyless 主開關與車體連接器連接。 Connect the Keyless main switch to the vehicle: Connect the Keyless main switch to the vehicle body connector Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual 8. 將 Keyless 主開關接地線與車輛連接：將接地線鎖附於車架金屬處。 Connect the Keyless main switch ground wire to the vehicle: Attach the ground wire to the frame metal. 9. 大功告成，將車殼安裝回去，即可享受 Keyless System 的所有功能! Put the shell back on, you're done. Then enjoy all the functions of Keyless System! 5. 產品使用說明 Product Instuctions Smart Key 按鈕說明(Smart keyfob button description) Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual 控制面板功能說明(Control Panel function description) Keyless System Unlock Smart Key 按下Wake (ON) Button 遠端解鎖並喚醒Keyless System。 Press the Wake (ON) Button of the smart keyfob to remotely unlock and wake up the Keyless System.
MK104 User Manual Keyless System Standby ⚫ 按下 Smart Key 上的 Lock (OFF) Button 使 Keyless System 進入待機後且將系統設定 “Lock “狀態。 Press the Lock (OFF) Button on the Smart Key to put the Keyless System into standby and set the system to "Lock" state. ⚫ 按下控制面板上的 Start/Stop Button 使 Keyless System 進入待機。 Press the Start/Stop Button on the control panel to put the Keyless System into standby mode. ⚫ 無動作 10 秒後，自動進入 Keyless System 待機狀態。 After 10 seconds of inactivity, the Keyless System automatically enters standby mode.
MK104 User Manual ◼ 使用備用工具將螺絲卸下，即可看到備用鑰匙孔。 Use the spare tool to remove the screw to reveal the spare key hole. ◼ 插入備用鑰匙，將紅點旋至對準 Unlock. Insert the spare key and turn the red dot to align with Unlock point. Whayu Industrial Co., Ltd. http://www.whayu.
MK104 User Manual ◼ 使用備用小工具兩柱，對準兩孔插入。 Use the two levers of the spare gadget and insert them into the two holes. ◼ 即可操作所有功能。 All functions can be operated immediately. ◼ 待車輛修復完畢或者 Smart key 更換電池後，依序將產品恢復至初始狀態。 After the vehicle is repaired or the Smart keyfob battery is replaced, the product will be restored to its original state in order. 6.
MK104 User Manual ⚫ Keyless 系統保護機制 Keyless system protection mechanism 當連續 6 次嘗試喚醒 Keyless System，出現 Keyless System 鎖定警示，接著 Keyless System 設 定為 “ Lock ” 狀態，需要使用 Smart Key 解鎖。 When 6 consecutive attempts are made to wake up the Keyless System, the Keyless System lock warning appears and the Keyless System is then set to "Lock" status, requiring a Smart Key to unlock it.
MK104 User Manual operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. 8. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
MK104 User Manual This module is intended for OEM integrator. This module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
