User's Manual

MK104 User Manual
Whayu Industrial Co., Ltd. http://www.whayu.com/
Keyless System Standby
⚫ 按下 Smart Key 上的 Lock (OFF) Button 使 Keyless System 進入待機後且將系統設定 “Lock
“狀態。
Press the Lock (OFF) Button on the Smart Key to put the Keyless System into standby and set
the system to "Lock" state.
⚫ 按下控制面板上的 Start/Stop Button 使 Keyless System 進入待機。
Press the Start/Stop Button on the control panel to put the Keyless System into standby mode.
⚫ 無動作 10 秒後，自動進入 Keyless System 待機狀態。
After 10 seconds of inactivity, the Keyless System automatically enters standby mode.
Keyless System Backup Method
當車輛電瓶損壞導致無法使 Keyless System 正常工作或者 Smart Key 電池沒電，可使用備用機
制來解鎖車輛，進行車輛的操作。
When the vehicle battery is damaged and the Keyless System does not work properly or the Smart
Keyfob battery is dead, you can use the Keyless System Backup mechanism to unlock the vehicle
and operate the vehicle.
◼ 使用備用工具，取出螺絲起子並固定。
Using the spare tool, remove the screwdriver and fix it.
Step 1
Step 2
◼ 將 Smart Key 中的備用鑰匙取出
Remove the physical spare key from the Smart Keyfob
◼ 將 Keyless 主開關之 Knob Cap 取下。
Remove the Knob Cap from the Keyless Main Switch.