Instruction Manual

Operation LS-R-4.8
20
2.3 Commissioning and Setup of the Scanner
2.3.1 Mounting/dismounting the shank
1. Dismounting the shank:
1.1 Remove clamping screws from the shank.
1.2 Remove shank.
2. Mounting the shank:
2.1 Slide the shank onto the laser scanner.
2.2 Insert the clamping screws and tighten to the torque specified in Fig. 7.
3. Calibrate the laser scanner.
Mounting/dismounting the shank
Shank
Clamping screw
AF4 mm
(2x)
(0506)
M=10 Nm (7 lbf.ft)
Hexagon key
AF4 mm (3489)
Laser scanner
LS-R-4.8