Instruction Manual

LS-R-4.8 Operation
23
7. Mount the programming clip on the laser scanner so that the infrared interface on the programming clip is
aligned with the infrared interface inside the battery compartment of the LS-R-4.8 laser scanner.
8. Push the battery compartment sleeve up until it closes on the programming clip.
Mounting the programming clip
9. Use the [Pairing] button in the pairing software to start pairing (more details on how to use the pairing software
can be found in the software user manual).
INFORMATION
After successful pairing, the WLAN connection is set up to transfer the scan data. This process is automatic and
requires no further action by the user.
10. After successful pairing, disconnect the USB cable from the IR stick.
11. Attach the cover cap on the IR stick.
12. Slide the battery compartment sleeve downwards and remove the programming clip from the laser scanner.
13. Carefully slide the battery compartment sleeve upwards as far as it will go.
NOTICE
Risk of damage to the equipment!
• When closing the battery compartment, ensure that both O-rings are properly seated!
IR programming interface
Programming clip
Cover cap
Battery compartment sleeve
O-ring 74x1.5
(6376)