Instruction Manual

LS-R-4.8 Operation
31
2.7 Maintenance and Cleaning
2.7.1 Cleaning the optical windows of the laser scanner
NOTICE
Risk of measuring errors!
Damage to the optical windows affects the measuring accuracy of the laser scanner.
• Contact the service department at m&h Inprocess Messtechnik GmbH.
NOTICE
Risk of measuring errors!
Grease and dirt deposits on the optical windows reduces the measuring accuracy of the sensor.
• Do not touch the optical windows of the sensor with bare hands or contaminate it otherwise.
• Remove contamination from the optical windows before measuring.
• Do not use aggressive cleaning agents, as they may damage the optical windows.
1. Wipe the optical windows with a clean, soft, lint-free micro-fibre cloth or with the supplied optics cleaning cloth
(4297).
2. If the contamination cannot be removed with the cloth, gently wipe the windows with a camera lens cleaner or
isopropyl alcohol.
3. If the contamination cannot be removed even with a camera lens cleaner or isopropyl alcohol, contact the
service department at m&h Inprocess Messtechnik GmbH.
Cleaning the optical windows of the laser scanner
Optical windows of the
laser scanner