User's Manual

TALONCV002UserManual
12

8.AT+IONDTE:Setdrivingtimeevents
9.AT+IONFR:Restorefactorydefaults
10.AT+IONGF:Setgeofenceborders
11.AT+IONGFH:Setgeofencearoundcurrentlocation
12.AT+IONGPIO:GPIORead/Write
13.AT+IONGS:GPSStatereport
14.AT+IONHB:Heartbeat
15.AT+IONHC:HeadingChange
16.AT+IONINFx:Listsysteminformationsegments
17.AT+IONIP:Settarget
serverIPaddressandportnumber
18.AT+IONIPC:IPChangereport
19.AT+IONIS:IgnitionState
20.AT+IONLT:LEDs’TimingandIntensity
21.AT+IONLPORT:SetthelocalIPportnumber
22.AT+IONNR:SettimebeforeIPsessionisclosedandrestarted
23.AT+IONNW:Setwatchdogtimeoutifnonetworkfound
24.
AT+IONPM:Setautopowerdownmode
25.AT+IONRF:ReportFormat‐ASCII/Binary
26.AT+IONRI:Setreporttimerinterval
27.AT+IONRM:ReportMask
28.AT+IONRN:Queuereportrecordfortransmission
29.AT+IONRR:Setresetreport
30.AT+IONRS:Resetsetting‐soft/hard,periodic
31.AT+IONSD:SetSMSresponsedestination
32.AT+IONSI:Setinterrupt
33.AT+IONSQ:
Setqueuelength
34.AT+IONSR:Setrelaydriver(GP3)statehighorlow
35.AT+IONSV:Readthefactoryapplicationsoftwareversion(readonly)
36.AT+IONTA:TowAlert
37.AT+IONTID:CDMAtowerIDandlocationdata
38.AT+IONUA:UpdateapplicationfirmwareOTA