User's Manual
Table Of Contents
© 2017 M-Labs Technologies LLC
15 / 15
4 Test Method
4.1 Hardware
Test Item
Description
Baseband Function Test
• Power Input Test
• Power Consumption and Current Test
• Heat Dissipation Test
• UART Stability Test
• GPIO Level Test
• LED Stability Test
• Drop Down Test
• ESD Test
• High/Low Temperature Test
• Humidity Test
RF Test
• RF Performance Test
• GPS Performance Test
• Antenna Performance Test
4.2 Software Test
Test Environment Construct
Message Test environment
1. USB dongle and PC as message server
2. Send message to LTE-V
UDP Test environment
1. Connect dongle to PC and create dialup as ip server
2. LTE-V create IP connection to server
UART Test environment
1. Connect LTE-V to PC with com serial cable
2. Open Terminal tool and send at command
3. Response can be shown at terminal window