Instructions

TECHNICAL MANUAL GS 3x.10 KNX – ENGLISH
22
3.1 Switching commands and priority relative humidity control – Threshold 1 / 2 / 3
Designation
Options
Description
rF threshold
1/2/3
20% to 50%
Definition of threshold 1, 2 or 3 for the relative humidity value.
Switching
command below
threshold 1/2/3
off
on
If measured value is below threshold 1/2/3, switching command will not be send.
If measured value is below threshold 1/2/3, switching command will be send.
Switching
command above
threshold 1/2/3
off
on
If measured value is above threshold 1/2/3, switching command will not be send.
If measured value is above threshold 1/2/3, switching command will be send.
Control value in
case of sensor
error
off
on
If sensor error, a switching command will not be send.
If sensor error, a switching command will be send.
Blocking object
Disabled
Enabled
No function.
Behavior when
unblocking
Don’t send
Send recent value
There is no control value sent when unblocking.
The recent value is sent when unblocking.
Behavior when
blocking
Don’t send
Send value
There is no control value sent when blocking.
A switching command is sent when blocking.
Switching command
when blocking
off
on
Definition of the switching command when blocking.