Instructions

TECHNICAL MANUAL GS 3x.10 KNX – ENGLISH
46
11.2.1.8.1. Intermediate counter (with function pulse counter)
Designation
Options
Description
Data type
(intermediate counter)
1-Byte value
2-Byte value
4-Byte value
Selection of data type to be used.
Limit value 1
Range depending on selected data type.
Limit value 2
Range depending on selected data type.
Behaviour if a limit value is
exceeded / undershot
Continue counting along perimeter
Stop until ETS reset
Counter restarts / continues if limit value is reached.
Counter stops (value stays fix) until reset via ETS
Reverse counting
direction
Inactive
Active
Function disabled.
Counting direction will be reversed.
Send counter reading at download,
ETS reset and
bus voltage recovery
Inactive
Active
Function disabled.
If active, the last counter reading after restart of the device oder after ETS reset will be
send.
Send counter reading
at change
Inactive
Active
Function disabled.
Counter reading will be sent on change.
Send counter reading
cyclically
Inactive
Active
Function disabled.
Send counter reading every … seconds / …minutes / …hours.