Instructions

TECHNICAL MANUAL GS 3x.10 KNX – ENGLISH
9
Number Name Object function C R W T U Objekt size Data type
84
E1 switching 4 actuation
output
C
-
-
T
-
1 Bit
switching
84 E1 HZ: Maximum level exceeded output C - - T - 1 Bit Boolean
84 E1 threshold output C - - T - 1 Bit switching
84 E1 threshold output C - - T - 1 Byte counter pulses (0...255)
84 E1 threshold output C - - T - 2 Bytes 2-Byte unsigned value, pulse
84 E1 threshold output C - - T - 2 Bytes float value, Temperature (°C)
85 E1 Store scene input C - W - - 1 Bit enable
85 E1 Enable save input C - W - - 1 Bit enable
85 E1 switching level 5 output C - - T - 1 Bit switching
85 E1 switching long actuation output C - - T - 1 Bit switching
86 E1 switching level up/down input C - W - - 1 Bit switching
86 E1 ZZ: Maximum level exceeded output C - - T - 1 Bit Boolean
86 E1 Change threshold lower minimum input C - W - - 1 Byte percent (0...100%)
87 E1 Number of actuations input C - W - - 1 Byte counter pulses (0...255)
87 E1 ZZ: Request counter reading input C - W - - 1 Bit switching
87 E1 Change threshold upper maximum input C - W - - 1 Byte percent (0...100%)
88 E1 ZZ: Reverse direction input C - W - - 1 Bit Boolean
88 E1 Send when below threshold input C - W - - 1 Byte counter pulses (0...255)
88 E1 Send when below threshold input C - W - - 2 Bytes 2-Byte unsigned value, pulse
88 E1 Send when below threshold input C - W - - 2 Bytes float value, Temperature (°C)
89
E1 ZZ: Reset
input
C
-
W
-
-
1 Bit
Boolean
89 E1 Send when above threshold input C - W - - 1 Byte counter pulses (0...255)
89 E1 Send when above threshold input C - W - - 2 Bytes 2-Byte unsigned value, pulse
89
E1 Send when above threshold
input
C
-
W
-
-
2 Bytes
float value, Temperature (°C)
90 E1 ZZ: Stop input C - W - - 1 Bit Boolean
99 E1 Block input C - W - - 1 Bit enable
101 E2 switching sensor output C - - T - 1 Bit switching
101 E2 Alarm sensor output C - - T - 1 Bit 1-Bit, Alarm
101 E2 switching output C - - T - 1 Bit switching
101 E2 Blinds UP/DOWN output C - - T - 1 Bit up/down
101 E2 Switch (event 0) output C - - T - 1 Bit switching
101 E2 Priority (event 0) output C - - T - 2 Bit priority switching
101 E2 1-Byte value (-128...127) (Event 0) output C - - T - 1 Byte 8-Bit unsigned value, counter pulses (0...255)
101 E2 1-Byte value (0...255) (Event 0) output C - - T - 1 Byte counter pulses (0...255)
101 E2 Scene (Event 0) output C - - T - 1 Byte scene control