PRINTER’S INSTRUCTIONS: INSTR,MANUAL,8 OHM,INWALL,SPKR - LINEAR P/N: 115913 B - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 5.500” X 8.
INTRODUCTION M&S in-wall speakers are designed for the discriminating listener who wants the ultimate in superb acoustics. M&S has full range of in-wall speakers that will bring out the best in any home-theater or whole-house stereo music system.
S50W Frequency Response Maximum Power Rating Impedance Overall Dimensions 50 Hz to 16 kHz 50 Watts 8 Ohms 8 5/8” W x 12” H x 3 3/8” D Specifications Two way; 6 ½” woofer, 1” mylar swivel tweeter Mounting Dimensions Grille Color 7 3/8” W x 10 ¾” H x 2 7/8” D Metal White S40W Frequency Response Maximum Power Rating Impedance Overall Dimensions 60 Hz to 20 kHz 40 Watts 8 Ohms 7 ½” W x 11” H x 3” D Specifications Two way; 5 ¼” woofer, 1” mylar swivel tweeter Mounting Dimensions Grille Color 6 1/8” W
SPEAKER INSTALLATION FOR NEW CONSTRUCTION Step 1. After you have determined the speaker locations using the guidelines above, secure a 16 gauge 2 conductor cable, such as the M&S Systems MS16X, (DO NOT USE STAPLES) for attachment to the speakers after the dry wall has been installed. Leave at least 18 inches additional cable for the connection during final speaker installation.
visually or by using a musical source to determine the best sound coverage for the listening area. To position the tweeter, press at the outside edge of the tweeter cone area. (DO NOT PRESS ON THE CONE DIRECTLY). Install the metal grille to complete the speaker installation. Step 5. Follow the instructions with the volume control and amplifier to complete the installation.
SERVICE & TROUBLESHOOTING M&S Systems is committed to producing high quality products for the home. If you have any questions or problems with the speaker systems or the system is not operating properly, contact your M&S installer or call M & S Systems at (800) 366-9422.
WARRANTY M&S Systems Limited 2-Year No-Fault Product Warranty M&S Systems warrants for 2 years from the date of “first user” purchase all products to be free of factory-caused defects of material and workmanship. M&S Systems will repair or replace, at its option, parts and materials at no charge. This warranty extends to the original purchaser of the product and to each subsequent owner of the product during the term of this warranty.
115913 B 7 of 7 115913 IMAGE 8 OF 8
