2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa

ManualsBrandsM-Spa ManualsHome building and DecorNest

2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa
http://www.the-mspa.com/care/FAQ.htm 1/10
MSPA
Home
 
ABOUT MSPA
 
PRODUCTS
 
BUYER'S GUIDE
 
CUSTOMER CARE
 
COMPANY
 
CONTACT
Find Your Local MSpa Dealer   Register Your MSpa Warranty   MSPA FAQ
 
MSPA FAQ
1. Question: What's the water capacity of MSpa products?
2. Question: Can I set the inflatable spa tub up on a concrete patio?
3. Question: Can I leave the spa tub all year around?
4. Question: Do you recommend using chemicals to clean the spa water?
5. Question: Does my MSpa carry a factory warranty?
6. Question: Does the spa liner require any special care to ensure durability?
7. Question: How do I prevent dirt and grime from getting into the spa water?
8. Question: How do I protect the spa from damaging grass or fungi developing on the concrete?
9. Question: How do UV rays affect the material that comprises the spa tub?
10. Question: How much amount of water can I fill up my spa tub?
11. Question: How long does it take to fill up the spa tub?
12. Question: How long will my spa tub last?
13. Question: How much air should I inflate the spa?
14. Question: How often should I change the water?
15. Question: How often should I clean or change the filter cartridge?
16. Question: Is a video available to show how to set up the spa?
17. Question: Is it safe for pets to play in the spa tub?
18. Question: Is there a repair patch enclosed for MSpa liner repair? How can I repair the leakage on the spa?
19. Question: How often should I test my spa water?
20. Question: Should I install my spa inside or outside?
21. Question: What could cause the spa to be lopsided?
22. Question: Can I use Chlorine and Bromine sanitizer products together?
23. Question: There is a strong chemical odor and my skin is irritated when I bath. What should I do?
24. Question: Can I use my MSpa during cold weather?
25. Question: What is needed to prepare a site to set up and use my MSpa tub?
26. Question: What is the approximate depth of the water to fill up my spa tub?
27. Question: What is the steepest slope that I am able to set up my spa on?
28. Question: What material is the?MSpa inflatable spa tub?made of?
29. Question: What other surfaces can be safely used to set up my spa?
30. Question: What should I use to clean my?MSpa before storing it for the winter or next season?
CUSTOMER CARE
Find Your Local MSpa Dealer
Register Your MSpa Warranty
MSPA FAQ
Language

Summary of content (10 pages)

PAGE 1
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa MSPA Home ABOUT MSPA Find Your Local MSpa Dealer PRODUCTS BUYER'S GUIDE Register Your MSpa Warranty CUSTOMER CARE COMPANY CONTACT MSPA FAQ MSPA FAQ 1. Question: What's the water capacity of MSpa products? 2. Question: C an I set the inflatable spa tub up on a concrete patio? 3. Question: C an I leave the spa tub all year around? 4. Question: Do you recommend using chemicals to clean the spa water? 5.
PAGE 2
/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa 31. Question: Why do I find algae in my spa even when I run my filter pump regularly? 32. Question: Would excessive spa chemicals affect?or cause deterioration to liners? 33. Question: Why an extension cord should not be used which states in the spa set up instruction? 34. Question: Is the heater defective if the heater button does not light up? 35. Question: Why the spa stops working for a couple of hours? 36.
PAGE 3
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa you to store your MSpa tub in a place that is warm and dry. 4. Question:Do you recommend using chemicals to clean the spa water? Answer:Yes. Please refer page 10-11 of MSpa CE manual, and also contact your local spa and pool water treatment specialist stores for right chemicals to buy and correct way to use. 5. Question:Does my MSpa carry a factory warranty? Answer:Yes.
PAGE 4
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa 3. After filling in proper amount of water, check air pressure again and make sure the pin reads in the green sector. 4. In hot weather or under sunshine, you can reduce air pressure to the yellow sector of manometer to avoid over inflation due to high temperature. 11. Question:How long does it take to fill up the spa tub? Answer:The time it takes to fill your new hot tub depends on hose size and water pressure.
PAGE 5
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa sidewalls could be damaged by pet claws and teeth. Improper usage of the spa tub will void MSpa warranty. 18. Question: Is there a repair patch enclosed for MSpa?liner repair??How can I repair the leakage on the spa? Answer:No. only the repair swatch is included in the package. For safety reasons, glue is not included in the package. Consumers can ask your local MSpa dealers for glue or any other repair kit.
PAGE 6
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa It’s helpful to put temp barrier mat in between the spa pool and the ground. Similar mat which is made of foam material or other materials with temp barrier function can also be used. 25. Question:What is needed to prepare a site to set up and use my MSpa tub? Answer:A flat, smooth and supporting surface with water drainage system is required. Uneven or unsound surfaces can damage the spa tub and void your warranty.
PAGE 7
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa Answer:Excessive or concentrated chemicals may cause damage to any spa and to the user. 33. Question:Why an extension cord should not be used which states in the spa set up instruction? Answer:In order to reduce the risk of electric shock. That means you can’t cut off the cord and connect the cord together by yourself, which may cause to the potential danger. It is important only to use a 16A power supply.
PAGE 8
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa 3. Environmental temperature lower than 10°C(50°F) and wind power above Gentle breeze/F 3 4. Activate bubbling system when heating 5. Spa lid is not covered or improperly covered when heating For a better heating result, we recommend to fill MSpa tub with warm water for quick heating and energy saving purposes. And also do not use filter cartridge when only to heat water or to ensure good heating performance. 41.
PAGE 9
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa Answer: MSpa Series Number locates underneath the control panel and on the spa pool cover, or on the back of rectangular shape control panel. 48. Question:How much does it cost to run? Answer: With a full function and half an hour use, the MSpa will cost approximately ￡5 or €3.2 per day. Each function on the pump/uses the following: Massage: 0.5-0.72kW/hr Filter: 0.035-0.06kW/hr Heater: 6.75-1.5kW/hr 49.
PAGE 10
2/5/2015 MSPA FAQ--MSpa Portable Inflatable Bubble Spa | by ORPC--MSpa MSpa Dealer Section | Become a Dealer | C ONTAC T | Friendly link | Member | Search | Sitemap ORPC C opyright 2010-2011 ORPC Shanghai Phone:+86 21 57402084 Email:info@orpc.com.cn MSpa, Inflatable Spa, Portable SPa, Inflatable Jacuzzi, Portable Jacuzzi, ORPC , the-mspa.com http://www.the-mspa.com/care/FAQ.