Owner`s manual

14
® ®
®
(a)
(b)
(c)
11.1.(1) 11.1.(2) 11.1.(3)
Zipper and Buckle Operation
11.1 Digital lock operation
Original pass code is “000”. Following the steps below to change the pass code:
● Push the button (a) in the direction shown in Fig. 11.1.(1) to unlock the digital lock.
● Set your preferred three-digit pass code digits by turning the number wheel (b), see Fig.11.1.(2).
● Re-insert the cable (c). The new pass code is set.
11.2 Square Spa Buckle Lock Operation
Lock the buckle
● Insert the buckle on the ground mat into the
spa cover buckle, until you hear a “click”
sound.
Unlock the buckle
● Pinch both sides of the locked buckle, and
press down on the round dot in the centre at
the same time. Press down the centre button
and release the lock.
11.
Lock Unlock
11.2
10.5 Turn on the heater on the spa control panel, refer to the “Control Panel Operation” section. Maximum heating temperature
is 104°F(40°C). Hourly heating rate is 1-3°F(1.2-1.7°C).