User's Manual

R3-NMW1F
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: [phone] Fax: [phone] E-mail: [e-mail]
EM-8286 P. 4 / 10
CONFIGURATOR SOFTWARE SETTING
With configurator software, settings shown below are available.
Refer to the software manual of R3CON for detailed operation.
■ WIRED SETTING
ITEM SETTING RANGE DEFAULT
Communication timeout 2 – 32000 (100 msec.) 30 (100 msec.)
■ MODBUS SETTING
ITEM SETTING RANGE DEFAULT
Address 1 – 247 1
Data Mode RTU / ASCII RTU
Baud rate 38.4 kbps / 19.2 kbps / 9600 bps / 4800 bps 38.4 kbps
Parity Odd / Even / None None
Write enable port RS-485 / wireless RS-485
Slave or Relay Slave / Relay Slave
■ WIRELESS SETTING
ITEM SETTING RANGE DEFAULT
PAN-ID 0000 to FFFE (hexadecimal, 4 digits) 0000
Radio channel number 0 (invalid), 1 to 43 (selectable up to 10 channels) 0
Short address 0000 (invalid), 0001 to FFFD (hexadecimal, 4 digits) 0000
Network name English one-byte characters within 16 characters
(one-byte space, “-”, “_”, “.”, “@” are usable.)
Blank
Encryption key 0000...0 to FFFF...F (hexadecimal, 32 digits) 0000...0
Transmitter power output 0.16 mW / 1 mW / 20 mW 20 mW
Communication timeout 0 to 32767 (100 msec.) 30
Number of devices in a network 1 – 30 (devices) /
31 – 60 (devices) /
61 – 100 (devices) /
Fixed + Low speed movement
1 – 30
Packet filtering Disable / Enable Enable
Filter timeout on polling (100msec) 10 to 600 (100 msec.) 10
Fixed route Disable / Enable Disable
Destination short address 0000 to FFFD (hexadecimal, 4 digits) 0000
Temporary detour Disable / Enable Enable
Low speed moving mode Disable / Enable Disable
Set network quality Standard / Changing frequency • delaytime middle /
Changing frequency • delaytime large
Standard
Network join mode V3-compatible mode / Fast join mode V3-compatible mode
Retry times before route switching 1 to 3 (times) 3