Operation Manual

25
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted
to the base of the cooker before
use (fig. 7.3).
LEVELLING THE COOKER
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 7.4)
Fig. 7.4
Fig. 7.3
A
B
BACKGUARD
Before installing the cooker,
assemble the backguard “C” (fig.
7.2).
– The backguard “C” can be found
packed at the rear of the cooker.
– Before assembling remove any
protective film/adhesive tape.
– Remove the two spacers “A”
and the screw “B” from the rear
of the cooktop.
– Assemble the backguard as
shown in figure 7.2 and fix it by
screwing the central screw “B”
and the spacers “A”.
Fig. 7.2
c