Technical data

1/120
Terminal blocks
with indicator
DLI 2.5 LD/35 PNP
DLI 2.5 LD/35 NPN
Compensating terminals
Dimensions
Length mm
Height (incl. TS 32/TS 35x7.5) mm
Terminal width (+ assembly tolerance 0.2) mm
Insulation stripping length mm
Connection data
Screw connection, solid
Screw connection, flexible
Conductor cross-section
VDE rated data
Current of through-busbar
Cross-section
Permissible current
LED current
Voltage Other versions on request
Ordering data
Type for TS 35 W
Cat.No. LED red
LED yellow
LED green
1Block of 10 (with built-in cross-connections)
Cat.No. LED red
LED green
Accessories
Mounting rail (2 m long)
End bracket (thickness mm)
for TS 35 EW 35 (8.5)
End plate (thickness mm) AP PA (1.5)
Cross-connector (preassembled) 2-poles
3-poles
4-poles
10-poles
Connection sleeve
Cross-connection bracket
65
–/49
6
7
0.5…2.5 mm
2
0.5…2.5 mm
2
AWG 22…14
20 A
2.5 mm
2
–
< 5 mA
5…30 V–
DLI 2.5 LD/35 PNP
157851
801036
157852
157853
157854
Type Cat.No. Qty.
TS 35 038340 –
EW 35 (8.5) 038356 50
AP PA 131326 20
Q 2 131250 50
Q 3 131260 50
Q 4 131270 50
Q 10 131310 20
VH 3.8 134580 100
QL 2 139950 100
65
–/49
6
7
0.5…2.5 mm
2
0.5…2.5 mm
2
AWG 22…14
20 A
2.5 mm
2
–
< 5 mA
5…30 V–
DLI 2.5 LD/35 NPN
157855
812067
157856
157857
157858
Type Cat.No. Qty.
TS 35 038340 –
EW 35 (8.5) 038356 50
AP PA 131326 20
Q 2 131250 50
Q 3 131260 50
Q 4 131270 50
Q 10 131310 20
VH 3.8 134580 100
QL 2 139950 100
Dimensions
Length mm
Height (incl. TS 32/TS 35x7.5) mm
Terminal width (+ assembly tolerance 0.2) mm
Insulation stripping length mm
Connection data
Screw connection, solid
Screw connection, flexible
Conductor cross-section
VDE rated data
Power
Cross-section
Approvals
Ordering data
Resistance 10 Ohm
30 Ohm
50 Ohm
100 Ohm
500 Ohm
1 k Ohm
5 k Ohm
10 k Ohm
100 k Ohm
500 k Ohm
2 M Ohm
Accessories
Mounting rail (2 m long)
End bracket (thickness mm) for TS 32 EWK 1 (8.5)
for TS 35 EW 35 (8.5)
End plate (thickness mm) AP PA (1.5)
End plate (thickness mm)
Partition (thickness mm)
Shield bus
Solder lug
Technical data for the 30 Ohm compensation resistor
Resistor material: “Cermet”
Resistor setting range: 0…30 Ohm
Curve form: Linear
Temperature coefficient: ± 100 ppm/°C
Mechanical service life: 200 actuations without
permissible deviations throughout the entire resistance range
Resistance change per spindle turn: ² 1.2 Ohm
Rated output for total resistance: 1 Watt at 70 °C
Rated current: 120 mA
Ambient temperature: –55 °C to +70 °C
Sealing:
1) Leak tested in water at 70°C without bubble formation
2) Storage in SFW 2.0 S to DIN 50018. 9 cycles