Technical data
1/142
ADK 3 W ADK 1 T AKZ 2.5 K ADK 1 FT
5/26/45.5
22.4…23.6
7 mm/M 2.5/3.0 x 0.5
250 V/8 A/2.5 mm
2
4 kV/3
0.4…0.7
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
A2
10
300/250 V/10 A/22…12 AWG
300 V/10 A/26…10 AWG
1.5 Cat.No. Qty.
Solder lug. 010916
010886 100
010896 100
010906 100
Type Cat.No. Qty.
AP (3) 069726 50
PS 2.3 018040 20
StB 8.5 021570 50
FW 5 047346 500
FS 5 047356 500
6/22/52
24
11 mm/M 2.5/3.5 x 0.6
250 V/10 A/2.5 mm
2
4 kV/3
0.4…0.7
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
A2
–
–
300 V/3 A/22…14 AWG
1.5 Qty. 2.5 Qty.
017696 100 017706 100
Type Cat.No. Qty.
AP (3) 047626 50
TW (0.5) 044230 50
SST 1.3 030660 –
FW 6 046866 500
FS 6 046876 500
6/22/57.5
8.4/21
–
250 V/8 A/1.5 mm
2
4 kV/3
–
–
–
–
–
–
–
300 V/15 A/–
1.5 Qty.
035980 100
Type Cat.No. Qty.
AP (3) 036000 20
TW (0.5) 044230 50
SST 1.3 030660 –
FW 6 046866 500
FS 6 046876 500
6/22/50.5
19.5…21.9
9 mm/M 3/3.5 x 0.6
400 V/8 A/4 mm
2
6 kV/3
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
A3
10
300/250 V/10 A/26…12 AWG
300 V/15 A/26…12 AWG
1.5 Qty. 2.5 Qty.
052146 100 051766 100
037236 100 037226 100
036636 100 036626 100
Type Cat.No. Qty.
AP (3) 047626 50
TW (0.5) 044230 50
PS 2.3 018040 20
SST 1.3 030660 –
FW 6 046866 500
FS 6 046876 500
Feed-through chassis terminal
Solder connection
Tab connection
Spring clip connection
to DIN 41 611 Part 4
Wrap connection to DIN/IEC 352 Part 1
Dimensions
Width/length/height with pins (mm)
Length of solder lug/pin (mm)
Insulation stripping length/clamping screw/blade size
VDE rated data 0611 Part 1/8.92/IEC 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Tightening torque with DMS2 electric screwdriver
Clampable conductors
“e” solid H07V-U mm
2
“m” stranded H07V-R mm
2
“f” flexible H07V-K mm
2
“f” flexible H07V-K and AEH DIN 46 228/1 mm
2
“f” flexible H07V-K and AEH with plastic insul. collar mm
2
Gauge pin to 947-1 Size
Cont. current of cross-connection 2-pole A
Cont. current of cross-connection multi-pole A
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version F.sheet metal thickness mm
Polyamide
Melamine
EP
Pin 0.6x0.6
Pin 1.0x1.0
Pin 0.8x1.6
FS 1x6.3 slotted/0.8x2.8
12-pole Polyamide
End plate (thickness mm)
Melamine
Polyamide
EP
Spacer (thickness mm)
Melamine
Melamine
Small partition (thickness mm)
HP
Test plug/socket
PS StB
Fuse pin/insulating sleeves/expansion rivet
Marking tags Print
Consecutive horizontal
Consecutive vertical
1 2 3 4 5 6
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section