Technical data

1/143
MKL 2/12
86/15/23
8
5
63 V/20 A/2.5/1.5 mm
2
1.5 kV/3
0.4…0.6
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
A2
300 V/10 A/24…12 AWG
300 V/10 A/24…12 AWG
Cat.No. Qty.
024146 50
SN 020010 500
BSTb 10/12 024570 50
BSTo 10/12 024560 50
SP 90 FF
SP 90 LF
40/45.5/228.5/110
217/90
380 V~/16 A/2.5/1.5 mm
2
6 kV/3
300/250 V/10 A/–
–
SP 90 FFQty. SP 90 LFQty.
024812 1
024817 1
060892 1
060897 1
024822 1
024827 1
Type Cat.No. Qty.
IH 2.8 038606 100
IH 6.3 038626 100
Feed-through chassis terminal strips
Plug boards
SP 10 FF
SP 10 LF
SP 60 FF
SP 60 LF
42/46.5/170/28
147
400 V/16 A/2.5/1.5 mm
2
6 kV/3
300/250 V/10 A/–
–
SP 10 FFQty. SP 10 LFQty.
045622 10
048052 10
048057 10
Type Cat.No. Qty.
IH 2.8 038606 100
IH 6.3 038626 100
FW 5 047346 500
40/45.5/162.5/110
151/90
400 V/16 A/2.5/1.5 mm
2
6 kV/3
300/250 V/10 A/–
–
SP 60 FFQty. SP 60 LFQty.
034032 1
034037 1
060902 1
034372 1
034377 1
012452 1
012457 1
Type Cat.No. Qty.
IH 2.8 038606 100
IH 6.3 038626 100
Dimensions
Width/length/height (mm)
Hole spacing/Fixing dimensions mm
Insulation stripping length/clamping screw/blade size
VDE rated data 0611 Part 1/8.92/IEC 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Tightening torque with DMS2 electric screwdriver
Clampable conductors
“e” solid H07V-U mm
2
“m” stranded H07V-R mm
2
“f” flexible H07V-K mm
2
“f” flexible H07V-K and AEH DIN 46 228/1 mm
2
“f” flexible H07V-K and AEH with plastic insul. collar mm
2
Gauge pin to 947-1 Size
Cont. current of cross-connection 2-pole A
Cont. current of cross-connection multi-pole A
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
Pin 1.0 x 1.0 Polyamide
Polyamide
Pin 0.8 x 2.8 (push-on), unprinted Polyamide
Pin 0.8 x 2.8 (push-on), printed, 1…32 Polyamide
Pin 0.8 x 2.8 (push-on), printed,1…32, blue Polyamide
6 x plug-in per pole (6.3 x 0.8) Melamine
6 x plug-in per pole (6.3 x 0.8), blue Melamine
6 x plug-in per pole (6.3 x 0.8), & 12 x 2.8 x 0.8 slotted Melamine
6 x plug-in p.p.(6.3 x 0.8), & 12 x 2.8 x 0.8 slotted, blue Melamine
3 x plug-in/1 x solder per pole Melamine
3 x plug-in/1 x solder per pole. blue Melamine
3 x plug-in (6.3 x 0.8 and 6 x 2.8 x 0.8)/1 x solder Melamine
3 x plug-in (6.3 x 0.8 and 6 x 2.8 x 0.8)/1 x solder, blueMelamine
2 x direct assembly, 1 x Pin 0.8 x 1.6 Polyamide
Insulating sleeve
Marking tags Print
Dekafix for group marking
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section