Technical data
1/20
WTR 2.5Disconnect test terminal blocks WTR 2.5 D
With diode plug
WTR 2.5 D
With StB
with diode plug and 2.3
socket
WTR 2.5
Without disconnector
–
5/60/49
10 mm/M 2.5/3**/3.5 x 0.6
800 V/16* A/2.5 mm
2
6 kV/3
0.4...0.8/0.5...1.0**
1/2**
0.5…4
1.5…4
0.5…2.5
0.5…2.5
0.5…2.5
A 3
26
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
W Cat.No. Qty.
no StB 101110 100
2 StB 2.3** 101120 100
no StB 101118 100
2 StB 2.3** 101128 100
2 StB 2.0** 101300 100
101116 100
Type Cat.No. Qty.
WAP 2.5–10 105000 50
WTW 2.5–10 105010 20
QL 2 021580 100
QL 3 021590 100
QL 4 021600 50
QL 10 033800 20
BS-M 2.5x4.5 106270 100
PS 2.3 (ø 2.3) 018040 20
PS 2.0 (ø 2.0) 029380 20
WDS 2 106990 20
WAW 2 900451 –
SDIK for StB 902493
WSD 2.5 105846 25
WSD 2.5 105856 25
WSD 2.5 105866 25
WSD 2.5 105876 25
FW 5 047346 –
FS 5 047356 –
Dimensions
Width/length/height (mm) With TS 32 Y
Width/length/height (mm) With TS 35 x 7.5 W
Insulation stripping length/clamping screw
Rated data
Rated voltage/rated current/rated cross-section
Impulse voltage VDE 0110/1.89 /pollution severity
Further technical data
Tightening torque range Nm
Torque setting with DMS2 electric screwdriver
Clampable conductor
“e” solid H07V-U mm
2
“m” stranded H07V-R mm
2
“f” flexible H07V-K mm
2
“f” flexible H07V-K and AEH DIN 46 228/1 mm
2
“f” flexible H07V-K and AEH With plastic insul.collar mm
2
Gauge pin to 947-1 Size
Continuous current rating of Cross-connection2-poles A
Continuous current rating of Cross-connectionmultipole A
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Version
Wemid
Wemid
blue Wemid
blue Wemid
Wemid
dark beige/yellow Wemid
beige/yellow Polyamide
blue/light blue Polyamide
orange Polyamide
End plate/partition
WAP (thickness 1.5 mm)
Wemid
WTW
Wemid
Cross-connection
QL 2–10
PS
Cross-connection plug (2-poles. ø 2.3)
Notching tool
To notch the punch-out terminal moulding for
cross-connections
Screwdriver
SDIK
Diode plug (spare)
(
)
With wire link
Without special components
Marking tags Print
Consecutive horizontal
Consecutive vertical
1 2 3 4 5 6
–
5/60/49 + 18 für WSD
10 mm/M 2.5/3.5 x 0.6
500 V/16* A/2.5 mm
2
6 kV/3
0.4...0.8
1
0.5…4
1.5…4
0.5…2.5
0.5…2.5
0.5…2.5
A 3
26
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
W Cat.No. Qty.
) 101350 50
( 101360 50
With wire link 101370 50
Type Cat.No. Qty.
WAP 2.5–10 105000 50
WTW 2.5–10 105010 20
QL 2 021580 100
QL 3 021590 100
QL 4 021600 50
QL 10 033800 20
BS-M 2.5x4.5 106270 100
PS 2.3 (ø 2.3) 018040 20
PS 2.0 (ø 2.0) 029380 20
WAW 2 900451 –
WSD 2.5 105846 25
WSD 2.5 105856 25
WSD 2.5 105866 25
WSD 2.5 105876 25
FW 5 047346 –
FS 5 047356 –
–
5/60/49 + 18 für WSD
10 mm/M 3/3.5 x 0.6
500 V/16* A/2.5 mm
2
6 kV/3
0.5...1.0
2
0.5…4
1.5…4
0.5…2.5
0.5…2.5
0.5…2.5
A 3
26
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
W Cat.No. Qty.
) 101320 50
( 101330 50
With wire link 101340 50
Type Cat.No. Qty.
WAP 2.5–10 105000 50
WTW 2.5–10 105010 20
QL 2 021580 100
QL 3 021590 100
QL 4 021600 50
QL 10 033800 20
BS-M 2.5x4.5 106270 100
PS 2.3 (ø 2.3) 018040 20
PS 2.0 (ø 2.0) 029380 20
WAW 2 900451 –
SDIK for StB 902493
WSD 2.5 105846 25
WSD 2.5 105856 25
WSD 2.5 105866 25
WSD 2.5 105876 25
FW 5 047346 –
FS 5 047356 –
–
5/60/49
10 mm/M 2.5/3**/3.5 x 0.6
800 V/16* A/2.5 mm
2
6 kV/3
0.4...0.8/0.5...1.0**
1/2**
0.5…4
1.5…4
0.5…2.5
0.5…2.5
0.5…2.5
A 3
26
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
W Cat.No. Qty.
101290 100
With StB 2.3** 101280 100
With StB 2.0** 101310 100
Type Cat.No. Qty.
WAP 2.5–10 105000 50
WTW 2.5–10 105010 20
QL 2 021580 100
QL 3 021590 100
QL 4 021600 50
QL 10 033800 20
BS-M 2.5x4.5 106270 100
PS 2.3 (ø 2.3) 018040 20
PS 2.0 (ø 2.0) 029380 20
WAW 2 900451 –
SDIK for StB 902493
WSD 2.5 105846 25
WSD 2.5 105856 25
WSD 2.5 105866 25
WSD 2.5 105876 25
FW 5 047346 –
FS 5 047356 –
* Rated current is limited to 1 A when using the diode plug with soldered diode
** M 3 thread for versions with sockets (StB)
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section