Technical data
1/30
WSI 6
for metric fuses
Fuse terminal blocks WSI 6/2*
for inch fuses
–
8/60/60
12 mm/M 3.5/4.0 x 0.8
500 V/6.3 A**/6 mm
2
6 kV/3
0.8…1.6
3
0.5…10
1.5…10
0.5…10
0.5…6
0.5…6
A 5
26
600 V/10 A/20…8 AWG
300 V/10 A/20…8 AWG
W Cat.No. Qty.
101100 50
dis.term w/contact sleeve
102820 50
Type Cat.No. Qty.
WAP 105000 50
WTW 2.5-10 105010 20
Install partition after last WSI 6
QL 2 019430 50
QL 3 019440 50
QL 4 019450 50
QL 10 033830 20
BS-M 3x5 105210 100
PS 2.3 018040 20
WAW 2 900451 1
054690 10
051030 10
064640 10
026580 10
019310 10
019270 10
019280 10
019290 10
043030 10
043040 10
043050 10
043060 10
043070 10
043080 10
043090 10
043100 10
043110 10
043120 10
043130 10
043140 10
FW 047346 –
FS 047356 –
Dimensions
Width/length/height (mm) With TS 32 Y
Width/length/height (mm) With TS 35 x 7.5 W
Insulation stripping length/clamping screw
Rated data for lower part of terminal
Rated voltage/rated current/rated cross-section
Rated impulse voltage VDE 0110/1.89 /pollution severity
Further technical data
Tightening torque range Nm
Torque setting with DMS2 electric screwdriver
Clampable conductor
“e” solid H07V-U mm
2
“m” stranded H07V-R mm
2
“f” flexible H07V-K mm
2
“f” flexible H07V-K and AEH DIN 46 228/1 mm
2
“f” flexible H07V-K and AEH With plastic insul.collar mm
2
Gauge pin to 947-1 Size
Continuous current rating of cross-connection 2-poles A
Continuous current rating of cross-connection multipole A
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Type
Wemid
Wemid
Wemid
Partition/End plate
WTW WAP
thickness 1.5 mm thickness 1.5 mm
Cross-connection
QL 2–10
BS
PS
Notching tool WAW 2 for QL
G fuse cartridges 5x25 mm with indicator***
to DIN 41 576 Rated current (A):0.2 med.blow
Rated voltage 250 V 0.5 med.blow
0.8 med.blow
1 med.blow
10 med.blow
2 rapid blow
4 rapid blow
6.3 rapid blow
G fuse cartridges 5 x 20 mm***
to DIN 41 660 IEC 127 BL 1
Rated current (A):0.10 rapid blow
Rated voltage 250 V 0.20 rapid blow
Switching capacity 1500 A 0.25 rapid blow
(at 250 V. 50 Hz. cos ϕ = 0.7) 0.50 rapid blow
1.0 rapid blow
1.6 rapid blow
2.0 rapid blow
2.5 rapid blow
G fuse cartridges 5 x 30 mm***
3.15 rapid blow
(500 V~/0.032…6.3 A). 4.0 rapid blow
Available from . Wickmann-Werke GmbH. 5.0 rapid blow
Annenstr. 113. 58453 Witten. Tel. 02302/66206.3 rapid blow
Marking tags Print
Consecutive horizontal
Consecutive vertical
–
8/60/70
12 mm/M 3.5/4.0 x 0.8
500 V/6.3 A**/6 mm
2
6 kV/3
0.8…1.6
3
0.5…10
1.5…10
0.5…10
0.5…6
0.5…6
A 5
26
600 V/10 A/20…8 AWG
300 V/10 A/20…8 AWG
W Cat.No. Qty.
12Vdc/24Vac
101130 50
20-30Vdc/40-60Vac
101220 50
40-60Vdc/80-120Vac
101230 50
115Vdc/230Vac
101240 50
Type Cat.No. Qty.
WAP 105000 50
WTW 2.5-10 105010 20
install partition after last WSI 6
QL 2 019430 50
QL 3 019440 50
QL 4 019450 50
QL 10 033830 20
BS-M 3x5 105210 100
PS 2.3 018040 20
WAW 2 900451 1
054690 10
051030 10
064640 10
026580 10
019310 10
019270 10
019280 10
019290 10
043030 10
043040 10
043050 10
043060 10
043070 10
043080 10
043090 10
043100 10
043110 10
043120 10
043130 10
043140 10
FW 047346 –
FS 047356 –
–
8/60/70
12 mm/M 3.5/4.0 x 0.8
500 V/6.3 A**/6 mm
2
6 kV/3
0.8…1.6
3
0.5…10
1.5…10
0.5…10
0.5…6
0.5…6
A 5
26
600 V/10 A/20…8 AWG
24 V/10 A/20…8 AWG
W Cat.No. Qty.
24 V– 101270 50
Type Cat.No. Qty.
WAP 105000 50
WTW 2.5-10 105010 20
install partition after last WSI 6
QL 2 019430 50
QL 3 019440 50
QL 4 019450 50
QL 10 033830 20
BS-M 3x5 105210 100
PS 2.3 018040 20
WAW 2 900451 1
054690 10
051030 10
064640 10
026580 10
019310 10
019270 10
019280 10
019290 10
043030 10
043040 10
043050 10
043060 10
043070 10
043080 10
043090 10
043100 10
043110 10
043120 10
043130 10
043140 10
FW 047346 –
FS 047356 –
–
12/60/67
12 mm/M 3.5/4.0 x 0.8
500 V/6.3 A**/6 mm
2
6 kV/3
0.8…1.6
3
0.5…10
1.5…10
0.5…10
0.5…6
0.5…6
A 5
26
600 V/20 A/20…8 AWG
600 V/16 A/20…8 AWG
W Cat.No. Qty.
101400 25
Type Cat.No. Qty.
WAP 105000 50
WTW 2.5-10 105010 20
install partition after last WSI 6
QL 2 047070 50
QL 3 047080 50
QL 4 047090 50
QL 10 047100 20
BS-M 3x5 105210 100
PS 2.3 018040 20
WAW 2 900451 1
Fuse cartridge
1/4”x1 1/4”
(6.3x32)
Rated voltage 440 V
E 2 A 029450 10
E 3 A 029570 10
E 5 A 029460 10
E 7 A 029580 10
E 10 A 029390 10
G-fuses
1/4”x
1
” (6.3 x 25)
(250 V 0.05…6.3 A)
FW 047346 –
FS 047356 –
* Rated thermal current to VDE 0611 = 6.3 A when used as a
short-circuit fuse up to 15 A***Note power loss of fuse cartridge up to 1.6 Watt ** max. power loss 1.6 Watt
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section
Note:
When fuse is defective the circuit
is still live. The circuit is broken by
opening the lever.
WSI 6 With LED-
Display
for metric fuses
for AC /DC see note
WSI 6 With 2
LED's
for metric fuses
for AC/DC see note