Technical data
1/44
ZPE 2.5Protective earth terminal blocks ZPE 2.5/3AN ZPE 2.5/4AN ZPE 4
5/63/39
10
–V/–A/2.5 mm
2
750
800 V/8 kV/3
0.5…4
0.5…4
0.5…2.5
0.5…2.5
A3
–V/–A/26…12 AWG
–V/–A/26…12 AWG
Type Cat.No. Qty.
ZPE 2.5 160864 100
ZAP/TW1 160874 50
SH 2 049492 10
ZTA 1 160904 25
ZTA 1/ZA 160905 25
TA 1 053586 20
PS 2.3 018040 20
SD 0.6 x 3.5 902423 1
ZGB 30 161193 20
ESO 7 160772 240
STR 7 051530 20
ZRH 2.5/1 161430 100
ZRH 2.5/2 161429 100
ZRH 2.5/3 161428 100
DEK 5 047346 500
DEK 5 047356 500
ZS 10/5 161000 480
ZS 10/5 161001 480
Dimensions
Width/length/height (mm) with TS 35 x 7.5 W
Insulation stripping length mm
VDE rated data 0611 Part, l 3/11.89
Rated voltage/current PEN/cross-section
Rated insulation voltage to VDE 0110/2.79/insul. group C V~
Rated voltage/rated impulse voltage/pollution severity
to VDE 0110/1.89
Further technical data
Clampable conductors:
“e” solid H07V-U mm
2
“f” flexible H07V-K mm
2
“f” with ferrule to DIN 46 228/1** mm
2
“f” with ferrule with plastic insulating collar** mm
2
Gauge pin to IEC 947-1: 1988 Size
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data Version
Green/yellow Wemid
End plate/partition Version
ZAP/TW Beige Wemid
Support block
SH
For insulating of
mounting rails in
insulated-earth installations.
Test adapter Version
Without pin
With pin
PS
Screw driver
SD to DIN 5264-A
Group marking
ZGB
ESO Blank snap-on tag
STR Transparent protective cover
Reducers*** Colour
ZRH for conductor 0.13...0.2 mm
2
White
ZRH for conductor 0.25...0.5 mm
2
Grey
ZRH for conductor 0.75...1 mm
2
Dark grey
Marking tags Print
DEK Consecutive horizontal
DEK Consecutive vertical
ZS 10 Blank
ZS 10 Printed
1 2 3 4 5 6
5/64/39
10
–V/–A/2.5 mm
2
750
800 V/8 kV/3
0.5…4
0.5…4
0.5…2.5
0.5…2.5
A3
–V/–A/26…12 AWG
–V/–A/26…12 AWG
Type Cat.No. Qty.
ZPE 2.5/3AN 160865 100
ZAP/TW2 160877 50
SH 2 049492 10
ZTA 1 160904 25
ZTA 1/ZA 160905 25
TA 1 053586 20
PS 2.3 018040 20
SD 0.6 x 3.5 902423 1
ZGB 30 161193 20
ESO 7 160772 240
STR 7 051530 20
ZRH 2.5/1 161430 100
ZRH 2.5/2 161429 100
ZRH 2.5/3 161428 100
DEK 5 047346 500
DEK 5 047356 500
ZS 10/5 161000 480
ZS 10/5 161001 480
5/79/39
10
–V/–A/2.5 mm
2
750
800 V/8 kV/3
0.5…4
0.5…4
0.5…2.5
0.5…2.5
A3
–V/–A/26…12 AWG
–V/–A/26…12 AWG
Type Cat.No. Qty.
ZPE 2.5/4AN 160866 100
ZAP/TW3 160880 50
SH 2 049492 10
ZTA 1 160904 25
ZTA 1/ZA 160905 25
TA 1 053586 20
PS 2.3 018040 20
SD 0.6 x 3.5 902423 1
ZGB 30 161193 20
ESO 7 160772 240
STR 7 051530 20
ZRH 2.5/1 161430 100
ZRH 2.5/2 161429 100
ZRH 2.5/3 161428 100
DEK 5 047346 500
DEK 5 047356 500
ZS 10/5 161000 480
ZS 10/5 161001 480
* Approvals applied for
** Ferrules crimped gas-tight
*** One Qty. consists of 100 x 10-pole strips.
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section
6 /62 /43.5
12
–V/–A/4 mm
2
750
800 V/8 kV/3
0.5...6
0.5...6
0.5...4
0.5...4
A4
–V/–A/26…10 AWG
–V/–A/26…10 AWG
Type Cat.No. Qty.
ZPE 4 163208 100
ZAP/TW4 163209 50
SH 2 049492 10
ZTA 2 160906 25
ZTA 2/ZA 160907 25
TA 1 053586 20
PS 2.3 018040 20
SD 0.6 x 3.5 902423 1
ZGB 30 161193 20
ESO 7 160772 240
STR 7 051530 20
ZRH 4/1 163664 100
ZRH 4/2 163665 100
ZRH 4/3 163666 100
DEK 6 046866 500
DEK 6 046876 500
ZS 12/6 161002 400
ZS 12/6 161003 400
W